User manual CLARION HX-D1

[. . . ] Owner's manual HX-D1 AM/FM CD PLAYER WITH CD/MD CHANGER CONTROL Thank you for purchasing the Clarion product. Please read this owner's manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. [. . . ] previously registered in a disc can be shown in the display of this unit. While a title is being shown in the display, press and hold the [DISP] button for 2 seconds or longer. Each time the [DISP] button is pressed, the display switches in the following order: Disc title (during CD Text or MD play) Radio Operations Changing the reception area This unit is initially set to USA frequency intervals of 10 kHz for AM and 200 kHz for FM. When using it outside the USA, the frequency reception range can be switched to the intervals below. While pressing [DISP] button, each time you press and hold the number "6" of the [DIRECT] buttons for 2 seconds or longer, the reception area switches from inside the USA to outside the USA or from outside the USA to inside the USA. Any station preset memories are lost when the reception area is changed. Artist name (during CD Text play) Track title (during CD Text or MD play) Listening to the radio 1. Each time the button is pressed, the radio reception band changes in the following order: FM1(F1) § FM2(F2) § FM3(F3) § AM § FM1. . . Press the [a] button or [d] button to tune in the desired station. If no title has not been set, the following indications are shown in the display. · When a normal CD is played on a CD changer compatible with CD Text Disc title : "DNO-TEXT" Artist name: "ANO-TEXT" Track title : "TNO-TEXT" · When an MD with no title set is played Disc title : "DNO-TTL" Track title : "TNO-TTL" Scrolling a title Press the [BAND] button for 2 seconds or longer while a title is shown in the display. The title scrolls to the left. After the end of the title is shown, the first 8 characters are shown again. Tuning There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning. Seek tuning 1. (FM or AM) If "MANU" is lit in the display, press and hold BAND button for 1 second or longer. "MANU" in the display goes off and seek tuning is now available. 2. When the [d] button is pressed, the station is sought in the direction of higher frequencies; if the [a] button is pressed, the station is sought in the direction of lower frequencies. Manual tuning There are 2 ways available: Quick tuning and step tuning. 10 HX-D1 Radio Operations When you are in the step tuning mode, the frequency changes one step at a time. Press [BAND] button and select the desired band (FM or AM). If "MANU" is not lit in the display, press and hold [BAND] button for 1 second or longer. "MANU" is lit in the display and manual tuning is now available. If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations. Preset scan Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. When a desired station is tuned in, press [SCN] button again to continue receiving that station. Note: · Be careful not to press and hold [SCN] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations. 2. q Quick tuning: Press and hold the [a] button or [d] button for 1 second or longer to tune in a station. q Step tuning: Press the [a] button or [d] button to manually tune in a station. Recalling a preset station A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically. Press the corresponding [DIRECT] button to recall the stored station. Press and hold one of [DIRECT] buttons for 2 seconds or longer to store that station into preset memory. Turning on and off the FM diversity system The FM diversity system automatically switches to the antenna that receives an FM broadcast with a stronger reception signal. [. . . ] "DISC" and "SCN" light in the display and the disc scan play starts. "DISC" and "SCN" go off from the display and the current track continues to play. 14 HX-D1 Listening to a portable audio player, etc. (AUX mode) You can listen to the sound coming from external equipment by connecting a portable audio player, etc. to the AUX terminal of this unit. Selecting the AUX mode Press the [FUNC] button to select the AUX mode. [. . . ]