User manual CLARION FZ501

[. . . ] Owner's manual & Installation manual Mode d'emploi et manuel d'installation Manual de instrucciones y de instalación Bluetooth® /USB/MP3/WMA RECEIVER LECTEUR Bluetooth® /USB/MP3/WMA RECEPTOR Bluetooth® /USB/MP3/WMA English 1 Contents English Thank you for purchasing this Clarion product. · Please fully read this owner's manual before operating this equipment. · Check the contents of the enclosed warranty card and store it in a safe place with this manual. FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When the Tag memory reaches capacity (64 tags) the bottom of the screen displays "Memory Full". Table 5: TAG Messages Tag Message Reason S T O R E D T A G # # If the Tag data is ready, and OF 64 [ISR] button on the remote control is pressed SENDING TAG ## Tag data is sending to iPod MEMORY FULL Tag storage is full TAG DATA IS NOT Tag data is not available AVAILABLE IPOD FULL iPod memory is full TAG NOT SUPPORT When connect and press [ISR] button on the remote control, the iPod without Tagging function Note: "iTunes® Tagging" function works by connecting THD301 (sold separately). iPod compatibility For detailed information on the playable iPod models, see our home page: www. clarion. com Note: · iPhones can also be connected to this system and "iPod" appearing in this manual should be referred to as "iPod/ iPhone". · This system will not operate or may operate improperly with unsupported versions. Note: Tagging music To begin tagging music, tune to an HD Radio station. The DIGITAL icon at the display must be illuminated, indicating a digital station is being received. Press the [ISR] Tags saved to your iPod can be managed using the iTunes software, available at www. apple. com/itunes. 14 iTunes® Tagging English 15 Downloading tags to your iPod To download tags to your iPod, plug your iPod into the unit. All existing tags are automatically transferred to the iPod and deleted from the head unit's memory. If your iPod is connected when a song is tagged, the Tag will be immediately transferred to the iPod. Note: When transferring Tags to your iPod, the unit must remain in HD RADIO mode. To purchase tagged songs, you must sync your iPod to iTunes and then click the "Tagged" list on the left side of the iTunes software screen. What is seen on the radio's display to let me know I have tagged the tune?Press [ISR] button on the remote control to show "STORED TAG ## OF 64". After connect to your iPod, the display shows "SENDING TAG ##". If no connection, the display will show "STORED TAG ## OF 64". When you connect to your iPod, Tag information will be saved in the iPod, and the data in E2PROM will be cleared. If you have install iTunes, connect your iPod to your computer and buy songs online. Note: 1. "TAG" and "DIGITAL" light up when Tagging function is ready, press [ISR] button on the remote control to start iTunes Tagging. USB Operations English 1. When connecting a USB device, the unit will read the files automatically. To remove the USB device, you should first select another source or turn off the power, in order to avoid damaging the USB device. To resume MP3/WMA play, press the [ ] button on the remote control again. Folder Select This function allows you to select a folder containing MP3/WMA files and start playing from the first track in the folder. Press and hold [CONTROL] knob (up) on the panel to move the next folder. To select a track, press the [CONTROL] knob (right / left) on the panel or [ , ] button on the remote control. Selecting a track Track-up 1. [. . . ] For tough dirt, apply a little cold or warm water to a soft cloth and wipe off the dirt gently. 4) Cautions on Installation English 1. Prepare all articles necessary for installing the source unit before starting. If you have to do any work on the car body, such as drilling holes, consult your car dealer beforehand. 6 mm (M5 screw) Figure 2 Figure 3 5) Installing the Source Unit 1. [. . . ]