User manual CLARION FZ409

[. . . ] Owner's manual Mode d'emploi Istruzioni per l'uso USB/MP3/WMA/AAC RECEIVER / CeNET CONTROL RÉCEPTEUR USB/MP3/WMA/AAC / CONTRÔLE CeNET RECEPTOR USB/MP3/WMA/AAC / CONTROL CeNET CLARION PRODUCT REGISTRATION INFORMATION For USA and Canada only Dear Customer: Congratulations on your purchase of a Clarion mobile electronic products. We are confident that you'll enjoy your Clarion experience. There are many benefits to registering your product. We invite you to visit our website at www. clarion. com to register your Clarion product. We have made product registration simple with our easy to use website. Once you're registered, we can keep you informed of important product information. [. . . ] When MP3/WMA/AAC files are played, a little no sound part is caused between tunes. 3. Some noise may occur depending on the type of encoder software used while recording. 1. When writing MP3/WMA/AAC file, please select "FAT12", "FAT16" or "FAT32" as the file system format. Normal play may not be possible if the files are recorded on another format. The folder name and file name can be displayed as the title during MP3/WMA/AAC play but the title must be within 64 single byte alphabetical letters and numerals (including an extension). Do not affix a name to a file inside a folder having the same name. Logical format (File system) Insert and remove a USB memory device only when the device is not being accessed. Connecting or disconnecting the device at the following times may result in the loss of data: - If the USB memory device is removed or power is disconnected during writing to the device. - When the device is subjected to static electricity or electric noise. Exposure to direct sunlight or high temperatures may cause deformation or other malfunction of the USB memory device. !Playback will begin from the first file recorded on the device. 18 FZ409 USB Operations ] If the device is not recognized, touch the [ key to switch to the Source menu and select the source to the device. Depending on the number of tracks recorded, some amount of time may be required until all tracks are read into the unit. The order in which tracks are recorded may differ depending on the device connected (the actual playback order may not be the same as that indicated on your computer's display). English Pausing play ] key to pause play. Each time the [ ] key is touched, playback proceeds to another track in the advancing direction. Touch the [ ] key twice to move to the beginning of the previous track. To listen to tracks on a connected USB memory device ] key to switch to the Source 1. When USB memory device is selected, playback (except DRM files) will begin from the location at which playback was previously stopped. When a USB memory device is connected the USB mode will be displayed. When a USB memory device is disconnected and then reconnected, playback will begin from the previous position where playback is stopped. When a USB memory device is disconnected and then a different USB memory device is connected, playback will begin from the first file recorded on the device. Fast-forward/fast-backward Fast-forward Touch and hold the [ ger. ] key for 1 second or lon] key for 1 second or lon- Fast-backward Touch and hold the [ ger. To stop play ] key and switch the function to 1. Touch the [ a source other than the USB memory device. Touch the [ ] key for 1 second or longer, then the USB memory device will start playing the first track of current folder. Top function Do not remove the USB memory device when the USB mode is selected, since it may result in loss or damage to data on the USB memory device. Slide along [ key, the USB Option mode changed as following order: "SCAN" "REPEAT" "RANDOM" Note: During trick play, "TRICK OFF" will be appeared before "SCAN" item. FZ409 19 USB Operations This function allows you to locate and play the first 10 seconds of all the tracks in current folder. Slide along [ ] slider or touch [ ]/[ ] key to select "TRACK". Touch the [ENT] key, "TRACK SCAN" will be displayed for 2 seconds. [. . . ] Select "AUX SENSE" and touch [ ] key to enter detail setting stage. Slide along [ to select "HIGH", "MID" or "LOW". Note: When AUX mode is selected, AUX IN sensitivity can be set. Notes: This unit requires hands-free kit that supports [AUX] input as a source of cellular phone audio input. Please consult your local authorized Clarion dealer for more information on the hands free kit offered. 30 FZ409 7. No sound output when operating the unit with a m p l i fi e r s o r p o w e r antenna attached. [. . . ]