User manual CLARION DXZ948RMP

[. . . ] Check the contents of the enclosed warranty card and keep it carefully with this manual. This manual includes the operating procedures of the CD changer, MD changer, DVD changer, AUX, DAB, DSP DVD, PHONE MUTE and TV tuner connected via the CeNET cable. The CD changer, MD changer, DVD changer and TV tuner have their own manuals, but no explanations for operating them are described. English Contents 1. FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] CTR WIDTH (0 to 7): Selecting CTR WIDTH mode will adjust the localization of the center channel between the center speaker and the front speaker L/R. 16 DXZ948RMP AC-Processor II Operations English Adjusting AC-PII STD AC-PII STD makes natural stereo feeling for every seat by virtual space enhancer. VSE, which is room simulation, can correct the sound pressure inside the car so that the uniform sound effect is obtained at any seats. There are "DIFFUSE" "CAR WIDTH" and "CAR LENG" available for the items to be adjusted. 5. Press and hold the [VSE] button for 1 second or longer so that the POSITION effect is turned on or off. Adjusting AC-PII PRO 1. Press the [a] or [d] button to select item to be adjusted. There are "TIME ALIGN" and "SP GAIN" available for the items to be adjusted. DIFFUSE (Adjusts the correction deviation of broadness) CAR WIDTH (Adjusts the correction deviation of width inside the car) CAR LENG (Adjusts the correction deviation of length inside the car) 4. Turn the [ROTARY] knob clockwise or counterclockwise to make the adjustment. Press and hold the [DIRECT] buttons for 2 seconds or longer to store the edited contents. You can give a title to user memory. For the inputting method of titles, refer to the subsection "Entering titles" in section "Operations common to each mode". 4. Available channels are: "FRONT-L", "FRONT-R", "REAR-L", "REAR-R", "SW-L" and "SW-R". Turn the [ROTARY] knob clockwise or counterclockwise to make the adjustment. The adjustment of "SP-GAIN" range is from 0db to -20dB for each channel. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory. 2. When the [d] button is pressed, the station is sought in the direction of higher frequencies; if the [a] button is pressed, the station is sought in the direction of lower frequencies. Auto store Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position. The stations with good reception are stored automatically to the preset channels. Manual tuning There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. Press the [BND] button and select the desired band (FM or AM). If "MANU" is not lit in the display, press and hold the [BND] button for 1 second or longer. "MANU" is lit in the display and manual tuning is now available. Preset scan Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. When a desired station is tuned in, press the [SC] button again to continue receiving that station. Note: · Be careful not to press and hold the [SC] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations. 2. GQuick tuning: Press and hold the [a] or [d] button for 1 second or longer to tune in a station. [. . . ] GChapter up/down operation (FF/FB operation) Press the [d] button for 1 second or shorter to increment chapters. Hold down the [a] button for 1 second or longer to fast backward. Volume setting of TA, INFO, emergency broadcast (ALARM) and PTY The volume for TA, INFO, ALARM and PTY interrupts can be set during TA, INFO, ALARM and PTY interrupt. Perform the following operation depending on the connected model. The factory default setting is "15". During a TA, INFO, ALARM or PTY interrupt, turn the [ROTARY] knob clockwise or counterclockwise to set the volume to a desired level (0 to 33). When the TA, INFO, ALARM or PTY interrupt ends, the volume returns to the level it had before the interrupt. DXZ948RMP 31 9. (No sound is produced. ) No sound output when operating the unit with amplifiers or power antenna attached. [. . . ]