User manual CLARION DXZ666MP

[. . . ] DXZ666MP CD/MP3/WMA RECEIVER/CeNET CONTROL Thank you for purchasing this Clarion product. Please read this owner's manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. [. . . ] When you are in the step tuning mode, the frequency changes one step at a time. Press the [BND] button and select the desired band (FM or AM). If "MANU" is not lit in the display, press and hold the [BND] button for 1 second or longer. "MANU" is lit in the display and manual tuning is now available. 2. Quick tuning: Press the [å, ] lever upward or downward and hold in position for 1 second or longer to begin station tuning. Step tuning: Press the [å, ] lever upward or downward to perform manual tuning. 16 DXZ666MP Radio Operations English Recalling a preset station A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically. Press the corresponding [DIRECT] button to recall the stored station. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory. Instant station recall (ISR) Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. Recalling a station with ISR In any mode, press the [ISR] button to turn on the radio function and tune the selected radio station. Press the [ISR] button again to return to the previous mode. Manual memory 1. Select the desired station with seek tuning, manual tuning or preset tuning. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory. Auto store Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position. The stations with good reception are stored automatically to the preset channels. If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations. Preset scan Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. When a desired station is tuned in, press the [ ] button again to continue receiving that station. Note: · Be careful not to press and hold the [ ] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations. DXZ666MP 17 CD/MP3/WMA Operations English MP3/WMA What is MP3? MP3 is an audio compression method and classified into audio layer 3 of MPEG standards. This audio compression method has penetrated into PC users and become a standard format. This MP3 features the original audio data compression to about 10 percent of its initial size with a high sound quality. This means that about 10 music CDs can be recorded on a CDR disc or CD-RW disc to allow a long listening time without having to change CDs. What is WMA? WMA is the abbreviation of Windows Media Audio, an audio file format developed by Microsoft Corporation. Notes: · If you play a file with DRM (Digital Rights Management) for WMA remaining ON, no audio is output (The WMA indicator blinks). · Windows MediaTM, and the Windows ® logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. When using Windows Media Player 8, click on TOOLS OPTIONS COPY MUSIC tab, then under COPY SETTINGS, unclick the check box for PROTECT CONTENT. [. . . ] If the amplifiers turn off before all wires are attached, use an external relay to provide remote-on voltage (excessive current required). Turn off the power, then press the [RELEASE] button and remove the DCP. Press the reset button for about 2 seconds with a thin rod. Reset button General CD/MP3/WMA English Nothing happens when buttons are pressed. Display is not accurate. The microprocessor has malfunctioned due to noise, etc. DCP or main unit connectors are dirty. [. . . ]