User manual CLARION DXZ385USB

[. . . ] Owner's manual Mode d'emploi Manual de instrucciones DXZ385USB CD/USB/MP3/WMA/AAC RECEIVER WITH CeNET CONTROL AUTORADIO CD/USB/MP3/WMA/AAC / AVEC COMMANDE CeNET RECEPTOR CD/USB/MP3/WMA/AAC CON CONTROL CeNET This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] When setting is completed, remove the disc and reinsert it. Disc-In-Play function As long as the ignition key is turned to the ON or ACC position, this function allows you to turn the power to the unit and start playing the disc automatically when the disc is inserted even if the power is not turned on. CAUTION · Do not try to put your hand or fingers in the disc insertion slot. · Do not insert discs where adhesive comes out from cellophane tape or a rental CD label, or discs with marks where cellophane tape or rental CD labels were removed. It may be impossible to extract these discs from the unit and they may cause the unit to break down. Set the type of file to be played (multi-session function) When a single disc holds both normal CD type tracks and MP3/WMA/AAC type tracks, use this command to select which type of track to play. Default setting is "M-SESS CD". Backup Eject function Just pressing the [Q] button, ejects the disc even if the power to the unit was not turned on. Notes: · If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded (Auto reload). · If you force a CD into before auto reloading, this can damage the CD. · When only one type of track (either music CD or MP3/WMA/AAC) is recorded on a disc, selecting either type will allow playback of the disc. · When playing CCCD (copy-control CDs), set to CD type. DXZ385USB 19 CD/MP3/WMA/AAC Operations English Listening to a disc already loaded in the unit Press the [SRC] button to select the CD/MP3/ WMA/AAC mode. When the unit enters the CD/MP3/WMA/AAC mode, play starts automatically. If there is no disc loaded, the indication "NO DISC" appears in the title display. (Modes are not displayed for equipment that is not connected. ) Radio (Satellite radio) CD/MP3/WMA/ AAC USB/MTP/iPod (CD changer) (DVD changer) (TV) AUX Radio. . . Displaying CD titles This unit can display title data for CD-text/MP3/ WMA/AAC disc and user titles input with this unit. MP3/WMA/AAC disc Track Folder Title Album Artist Track . . . Notes: · If the CD playing is not a CD-text CD or no user title has been input, "NO TITLE" appears in the display. · If MP3/WMA/AAC disc is not input TAG, "NO TITLE" appears in the display. · In the case of album Tags for WMA, the information written into the extension header is displayed. · Only ASCII characters can be displayed in Tags. Loading a CD 1. Insert a CD into the center of the CD SLOT with the labeled side facing up. "LOADING" appears in the display, the CD enters into the slot, and the play starts. Notes: · Never insert foreign objects into the CD SLOT. · If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service. · Discs not bearing the or mark and CD-ROMs cannot be played by this unit. · Some CDs recorded in CD-R/CD-RW mode may not be usable. Selecting a track Track-up 1. Press the [v] button to move ahead to the beginning of the next track. Each time you press the [v] button, the track advances ahead to the beginning of the next track. Press the [x] button to move back to the beginning of the current track. Press the [x] button twice to move back to the beginning of the previous track. Pausing play 1. [. . . ] According to the state of operation on the device, the communication fault is caused. If the device is still not recognized, try replacing with a different device. Disconnect the device and reconnect. The device has been inserted Try reversing the connection direction of the device improperly. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. [. . . ]