User manual CLARION DRX9375R

[. . . ] BUTTON TERMINOLOGY Note: · Be sure to read this chapter referring to the front diagrams of chapter "3. CONTROLS" on page 5 (unfold). Names of Buttons 1 POWER button FUNC (function) button 2 -selector (ALPHA-TOUCH CONTROLLER) 3 Release button 4 DCP/SLOPING CONSOLE 5 Display 6 DISP (display) button 7 PS/AS (preset scan/auto store) button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [ SCN (scan) button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [ RPT (repeat) button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This function works when AF is on and REG is off. Auto store function for TP stations Auto storing while "TA" is lit: Only TP stations are auto stored. * Refer to PS/AS function in radio mode. Note: · This function is effective when related regional stations are received. PTY This function enables you to listen to selected programme type, irrespective of the function mode. In TA standby mode, TP stations have priority over PTY broadcasting stations. * Emergency messages interrupt all modes of operation. If the receiving condition of a recalled station is bad, press the same Preset button @. The unit switches to a related regional station. TA (Traffic Announcement) When the unit is in the TA standby mode, you can listen to traffic announcements preferentially when they start, irrespective of the function mode. You can also tune in to TP (traffic programme) stations automatically. To set the TA standby mode If you press TA button 0 when only "TP" is lit in the display, "TP" and "TA" light in the display and the unit is set to the TA standby mode until traffic announcements start. When traffic announcements start, "TRA INFO" appears in the display, and then PS (Programme Service Name) appears. Selecting PTY 1. When you press PTY button 9, "PTY" lights and PTY appears in the display. The unit enters PTY select mode. 3 If you press TA button 0 while traffic announcements are being broadcast, they are cancelled and the unit enters TA standby mode. Cancelling the TA standby mode If you press TA button 0 when "TP" and "TA" are lit in the display, "TA" in the display goes off and the TA standby mode is cancelled. Setting the auto tuning mode for TP stations If you press TA button 0 when only "TP" is lit or "TP" and "TA" are not lit in the display, "TA" lights and the unit automatically tunes in to TP stations. If the control is idle for 7 seconds after the PTY select mode has been entered, the display automatically returns to radio mode display and the unit enters the PTY standby mode. Press one of Preset buttons @ to select the desired PTY or select up or down to obtain a desired PTY using -selector 2. 3 Note: · The unit continues to tune in automatically if no TP station is received. Press TA button 0 again to stop auto tuning. DRX9375R/DRX9375RW 17 RDS Operations * The following stored already into the preset buttons for your convenience. 1 2 3 4 5 6 PTY ENGLISH (English) (News) (Information) (Popular music) (Sports) ENGLISH PTY Display (English) (News) (Affairs) (Information) (Sports) (Education) (Drama) (Culture) (Science) (Variety) (Popular music) (Rock music) (Middle of the Road Music) (Light music) (Classic music) (Other music) Preset memory of PTYs 1. If the control is idle for 7 seconds after the PTY select mode has been entered, the display automatically returns to radio mode display and the unit enters the PTY standby mode. The following 15 PTYs are selectable. NEWS INFO POP M SPORT CLASSICS (Classic Music) M, O, R, M (Middle of the Road Music) 3. When a selected PTY broadcast starts, the selected PTY appears in the display. If you press PTY button 9 during PTY broadcasts, PTY broadcasts are temporarily cancelled and the unit enters PTY standby mode. Cancelling PTY standby mode Press and hold PTY button 9 for 2 seconds or longer to turn off "PTY" in the display. NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M M, O, R, M LIGHT M CLASSICS OTHER M 3. Press and hold one of the Preset buttons 1 to 6 for 2 seconds or longer to put it into memory. After PTYs are stored in memory, "PTY MEMO" appears in the display. 3 Seek tuning of PTYs 1. Select left or right using -selector 2, when a receivable and desired PTY is found. [. . . ] Press Direct button @ number "2" while holding in DISP button 6. "DSP connect" appears in the display, and the DSP mode is set. To cancel the DSP mode, once again press Direct button @ number "2" while holding in DISP button 6. "DSP no conn" appears in the display, and the DSP mode is cancelled. [. . . ]