User manual CLARION DB179RGMP

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CLARION DB179RGMP. We hope that this CLARION DB179RGMP user guide will be useful to you.


CLARION DB179RGMP : Download the complete user guide (5725 Ko)

You may also download the following manuals related to this product:

   CLARION DB179RGMP (4541 ko)
   CLARION DB179RGMP (4506 ko)
   CLARION DB179RGMP (4442 ko)

Manual abstract: user guide CLARION DB179RGMP

Detailed instructions for use are in the User's Guide.

[. . . ] Owners manual Mode demploi Bedienungsanleitung Istruzioni per luso Gebruiksaanwijzing Manual de instrucciones Bruksanvisning Manual de instruções CD/MP3/WMA RECEIVER RADIO CD/MP3/WMA CD/MP3/WMA-RECEIVER RICEVITORE PER CD/MP3/WMA CD/MP3/WMA-RECEIVER RADIO CD/MP3/WMA CD/MP3/WMA-LÄSARE RECEPTOR CD/MP3/WMA Thank you for purchasing this Clarion product. Please read this owners manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT". [. . . ] Also, if a traffic announcement or programme type is broadcast from an RDS station, no matter what mode you are in, this broadcast is received. Additionally, if EON information is received, this information enables automatic switching of other preset stations on the same network and interruption of the station being received with traffic information from other stations (TP). AF PS PTY TP : Alternative Frequency : Programme Service Name : Programme Type : Traffic Programme English Preset scan Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. When a desired station is tuned in, press the [ ] button again to continue receiving that station. "P-SCN" will be displayed and "SCN" indicator lights in the display. Note: ] button Be careful not to press and hold the [ for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations. EON : Enhanced Other Network RDS interrupt does not function during AM radio reception. When set receives RDS signal, and can read PS data, PS appears in the display. A total of 24 preset positions (6-FM1, 6-FM2, 6-FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically. Press the [BND] button and select the desired band (FM or AM (MW/LW)). Press the corresponding [DIRECT] button to recall the stored station. Recalling a preset station TA (Traffic Announcement) In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode so you can listen to it. Traffic programme (TP) automatic tuning is also possible. This function can only be used when "TP" is lit in the display. When "TP" is lit, this means that the RDS broadcast station being received has traffic announcement programmes. DB178RMP / DB179RMP / DB179RGMP 13 RDS Operations If you press the [TA] button when only "TP" is lit in the display, "TP" and "TA" light in the display and the unit is set into the TA standby mode until a traffic announcement is broadcast. When a traffic announcement broadcast starts, "TRA INFO" appears in the display. If you press the [TA] button while a traffic announcement broadcast is being received, the traffic announcement broadcast reception is cancelled and the unit goes into the TA standby mode. As "TP" and "TA" lit in the display, press the [TA] button. The "TA" in the display goes off and the TA standby mode is cancelled. If "TP" is not lit, pressing the [TA] button searches for a TP station. English Setting the TA standby mode If you press the [SRC] button, emergency broadcast reception is cancelled. Cancelling an emergency broadcast Volume setting of TA, emergency broadcast (ALARM) and PTY The volume for TA, ALARM and PTY interrupts can be set during TA, ALARM or PTY interrupt. The factory default setting for this volume is "VOL 15". Cancelling the TA standby mode During a TA, ALARM or PTY interrupt, turn the [ROTARY] knob to set the volume to the desired level (0 to 33). When the TA, ALARM or PTY interrupt ends, the volume returns to the level it had before the interrupt. When "TP" is not lit, if you press the [TA] button, "TA" in the display lights and the unit automatically receives a TP station. Note: If a TP station is not received, the unit continues the search operation. Pressing [TA] button again goes off "TA" in the display and stops TP station searching. Searching for a TP station RDS Mode adjustment RDS Mode is one of the Adjustment mode. OTHER OPERATIONS" on page 21 for details. Auto store function for TP stations You can automatically store up to 6 TP stations into preset memory. If the number of TP can be received less than 6, broadcast stations already stored in memory and left without being overwritten. ] As "TA" lit in the display, press and hold the [ button for 2 seconds or longer. The TP stations with the good reception sensitivity are stored into preset memory. Even if you select FM1 or FM2, a TP station is stored into memory for FM3. Emergency broadcast If an emergency broadcast is received, all the Function mode operations are stopped. "ALARM" appears in the display and the emergency broadcast can be heard. 14 DB178RMP / DB179RMP / DB179RGMP CD/MP3/WMA Mode Operations MP3 is an audio compression method and classified into audio layer 3 of MPEG standards. [. . . ] "LEFT" Telephone calls can be heard on the front left speaker connected to this unit. If you connect this unit and your cellular phone with a separately sold unit, you can listen to your telephone calls on your car speakers. The factory default setting is "OFF". Cellular phone interrupt setting 2-1. Each time you turn the [ROTARY] knob, the setting changes in the following order: OFF ON MUTE. DB178RMP / DB179RMP / DB179RGMP 23 7. Reconnect each amplifier remote wire to the power antenna lead one by one. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CLARION DB179RGMP




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CLARION DB179RGMP will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.