User manual CLARION DB269RGMP

[. . . ] Owner's manual Mode d'emploi Bedienungsanleitung Istruzioni per l'uso Gebruiksaanwijzing Manual de instrucciones Bruksanvisning Manual de instruções DB268RMP BD269RMP BD269RGMP CD/MP3 RECEIVER RÉCEPTEUR CD/MP3 CD/MP3-RECEIVER RICEVITORE CON LETTORE CD/MP3 CD/MP3-RECEIVER RECEPTOR CON REPRODUCTOR DE DISCOS CD/MP3 CD/MP3-SPELARE/RECEIVER RECEPTOR CD/MP3 Thank you for purchasing this Clarion product. Please read this owner's manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. CAUTIONS: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT". [. . . ] If auto-scroll setting is set to on, the MP3 title will scroll continuously in MP3 title display mode. 12 DB268RMP/BD269RMP/BD269RGMP Basic Operations Adjusting telephone interrupt setting This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car. This function is not compatible with all cellular telephones. Contact your local authorized Clarion dealer for information on proper installation and compatibility. The factory default setting is "TEL OFF". Radio Operations English Listening to the radio 1. The frequency or PS appears in the display. PS: Programme service name 1. Press the [D] button and press [å]/[] button to select "TEL-SW". "TEL ON" or "TEL OFF" will be display after 2 seconds. Turn the [ROTARY] knob clockwise to turn on the telephone interrupt or counterclockwise to turn off the telephone interrupt. During telephone interrupt, the display shows "TEL". 2. To select a preset band, press the [BND] button, then select one of the preset bands such as FM1, FM2, FM3 or AM. Every time the [BND] button is pressed, the display will change as: F1 F2 F3 AM F1. . . Press the [å] or [] button to tune in the desired station. Tuning There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning. Seek tuning There are 2 types of seek tuning: DX SEEK and LOCAL SEEK. DX SEEK can automatically tune in to receivable broadcast stations; LOCAL SEEK can tune in to only broadcast stations with a good reception sensitivity. Press the [BND] button and select the desired band (FM or AM (MW/LW)). Tune into a station. If "MANU" is lit in the display, press and hold the [BND] button for 1 second or longer. If "TA" is lit in the display, TP stations are automatically sought. GDX SEEK Press the [å] or [] button to automatically seek a station. When the [] button is pressed, the station is sought in the direction of higher frequencies; if the [å] button is pressed, the station is sought in the direction of lower frequencies. When seek tuning starts, "DX" appears in the display. GLOCAL SEEK If you press and hold the [å] or [] button for 1 second or longer, local seek tuning is carried out. Broadcast stations with good reception sensitivity are selected. When local seeking starts, "LO" appears in the display. DB268RMP/BD269RMP/BD269RGMP 13 Radio Operations English Manual tuning There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. Press the [BND] button and select the desired band (FM or AM (MW/LW)). If "MANU" is not lit in the display, press and hold the [BND] button for 1 second or longer. "MANU" is lit in the display and manual tuning is now available. Auto store Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position. Notes: · The only FM band that can store the stations will automatically be stored in FM3. · When the auto store is performed, the station previously stored in the memory at that position is overwritten. [. . . ] · The MP3 player decodes each file ID3 TAG ver 2 by default, if ID3 TAG ver 2 is unavailable, ID3 TAG ver 1 will be decoded. · UNICODE ID3 (Chinese, Japanese and etc) is not supported. MAIN-1 . . . . . T02 02 : 18 (Track No. , Play time) CD-DA/MP3 selection on multisession CD 1. If a multisession CD which contains CD-DA and MP3 files is being inserted, user can select either CD-DA or MP3 files to be played. [. . . ]