User manual CLARION CZ501

[. . . ] Owner's manual & Installation manual Mode d'emploi et manuel d'installation Manual de instrucciones y de instalación Bluetooth® CD/USB/MP3/WMA RECEIVER LECTEUR CD/USB/MP3/WMA Bluetooth® RECEPTOR Bluetooth® CD/USB/MP3/WMA English 1 Contents English Thank you for purchasing this Clarion product. · Please fully read this owner's manual before operating this equipment. · Check the contents of the enclosed warranty card and store it in a safe place with this manual. FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] -ManualTuning Press the [ ] or [ ] button to move the radio frequency number up or down one step. Note: Be careful not to press and hold the [PS/AS] button for 1 second or longer, otherwise the auto store function is engaged and the unit starts storing stations. Automatic store (AS) Press and hold the [PS/AS] button (1 sec. ) to select six strong stations and store them in the FM3 or AM band using the Auto Store feature. After entering the stations into memory, the unit will automatically stop at each station for five seconds, allowing you to preview each selection. When using the Auto Store feature, the new stations replace any stations already stored in preset memory. HD Radio multicast channels To tune to an HD Radio multicast channel, tune to the main signal and then press the [MENU] button on the panel. · Select PTY type from the category list by rotate [VOLUME] knob and push. · Multi channel is available when a digital signal is detected, the DIGITAL icon will illuminate. If the digital signal becomes Note: You can stop the Auto Store function at any time by pressing the [PS/AS] button again. iTunes® Tagging English The CZ501 offers iTunes® Tagging, which allows the user to "Tag" songs playing on HD RadioTM stations for purchase later through iTunes. When press [ISR] button, the unit stores the title and artist song information that can then be transferred to your iPod when connected to the unit. A list titled "Tagged" will appear in iTunes, allowing you the option to purchase your tagged songs. SENDING TAG ## MEMORY FULL TAG DATA IS NOT AVAILABLE IPOD FULL TAG NOT SUPPORT Tag data is sending to iPod Tag storage is full Tag data is not available iPod memory is full When connect and press [ISR] button, the iPod without Tagging function Note: Note: "iTunes® Tagging" function works by connecting THD301 (sold separately). Tags saved to your iPod can be managed using the iTunes software, available at www. apple. com/itunes. Downloading tags to your iPod iPod compatibility For detailed information on the playable iPod models, see our home page: www. clarion. All existing tags are automatically transferred to the iPod and deleted from the head unit's memory. If an iPod is connected when a song is tagged, the Tag will be immediately transferred to the iPod. Note: · iPhones can also be connected to this system and "iPod" appearing in this manual should be referred to as "iPod/ iPhone". · This system will not operate or may operate improperly with unsupported versions. Note: When transferring Tags to an iPod, the unit must remain in HD Radio mode. To purchase tagged songs, you must sync your iPod to iTunes and then click the "Tagged" list on the left side of the iTunes software screen. Click the "view" button for purchasing information. Tagging music To begin tagging music, tune to an HD Radio station. The DIGITAL icon at the display must be illuminated, indicating a digital station is being received. The tagging function is highly depends on the receptions of the radio station. If the channel reception is insufficient, it will effect the operation of the tagging function. The song information is saved to the unit memory until an iPod is connected. You can tag up to 64 songs before the tags must be transferred to an iPod or deleted. When the Tag memory reaches capacity (64 tags) the bottom of the screen displays "Memory Full". Table5:TAGMessages TagMessage Reason S T O R E D T A G # # If the Tag data is ready, and OF 64 [ISR] button is pressed Note: 1. "TAG" and "DIGITAL" light up when Tagging function is ready, press [ISR] button to start iTunes Tagging. [. . . ] If you drop anything into the unit during installation, consult your dealer or an authorized Clarion service center. For tough dirt, apply a little cold or warm water to a soft cloth and wipe off the dirt gently. 4) Cautions on Installation English 1. Prepare all articles necessary for installing the source unit before starting. If you have to do any work on the car body, such as drilling holes, consult your car dealer beforehand. [. . . ]