User manual CLARION CZ309

[. . . ] Owner's manual Mode d'emploi Manual de instrucciones CZ309 CD/USB/MP3/WMA/AAC RECEIVER WITH CeNET CONTROL AUTORADIO CD/USB/MP3/WMA/AAC / AVEC COMMANDE CeNET RECEPTOR CD/USB/MP3/WMA/AAC CON CONTROL CeNET CLARION PRODUCT REGISTRATION INFORMATION For USA and Canada only www. clarion. com Dear Customer: Congratulations on your purchase of a Clarion mobile electronic products. We invite you to visit our website at www. clarion. com to register your Clarion product. We have made product registration simple with our easy to use website. Once you're registered, we can keep you informed of important product information. [. . . ] Press and hold the [RPT] button for 1 second or longer to perform folder repeat play. Random play This function allows you to play all tracks recorded on a disc in a random order. Press the [RDM] button to perform random play. Top function The top function resets the CD player to the first track of the disc. 1) on the disc. In case of MP3/WMA/AAC, the first track of a folder being played will be returned. Folder random play This function allows you to play all the tracks of all the folders recorded on an MP3/WMA/AAC disc in a random order. Press and hold the [RDM] button for 1 second or longer to perform folder random play. Other various play functions Scan play This function allows you to locate and play the first 10 seconds of all the tracks recorded on a disc. Press the operating button previously selected. The various play mode is canceled and the various play off mode appears in the display for 2 seconds. Folder scan play This function allows you to locate and play the first 10 seconds of the first track of all the folders on an MP3/WMA/AAC disc. Press and hold the [SCN] button for 1 second or longer to perform folder scan play. Repeat play This function allows you to play the current track repeatedly. Press the [RPT] button to perform repeat play. CZ309 15 Operations Common to Each Mode English To change adjustment setting 1. Press and hold the [DISP] button for 1 second or longer to switch to the adjustment selection display. "CLOCK" "SETTINGS" "SCRN SVR" "MSG INP" "SCROLL" "DIMMER" "A-CANCEL" "TEL-SP" "TELSW" "S-CHECK" 3. Press the [w] or [z] button to select the "desired setting value". In the case of display blinking "ENT", you can press the [ ] button to adjust the setting value. After completing settings, press the [DISP] button to return to the previous mode. Turning the screen saver function on or off This unit is provided with the screen saver function which allows you to show various kinds of patterns and characters in the operation status indication area of the display in a random order. If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display. The factory default setting is "ON". 2-1. Each time you press the [w] or [z] button, the setting changes in the following order: "MESSAGE" "ON" "OFF" Setting the clock 2-1. Press the [w] or [z] button to set the correct time. The clock is displayed in 12-hour format. Entering message information Message up to 30 characters long can be stored in memory and displayed as a type of screen saver setting. The factory default setting is "WELCOME TO CLARION". 3-4. Press the [ memory. ] button to store the time into Note: · You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car's battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled. Displaying the settings The number of indicator of this unit decreases, you can see the state of current settings at any operation mode. Press the [w] or [z] button to display the state of current settings. When the setting is selected, after 1 second the current state will be displayed. 2-1. Press and hold the [BND] button for 1 second or longer to clear the old message. Each time you press the [BND] button, the character type changes in the following order: Capital letters Numbers Symbols Capital letters. . . Press and hold the [ ] button for 2 seconds or longer to store the message in memory. Press and hold the [BND] button for 1 second or longer to cancel the input message. [. . . ] According to the state of operation on the device, the communication fault is caused. If the device is still not recognized, try replacing with a different device. Disconnect the device and reconnect. The device has been inserted Try reversing the connection direction of the device improperly. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. [. . . ]