User manual CLARION CZ300

[. . . ] Owner's manual & Installation manual Mode d'emploi et manuel d'installation Manual de instrucciones y de instalación CD/USB/MP3/WMA RECEIVER LECTEUR CD/USB/MP3/WMA RECEPTOR CD/USB/MP3/WMA English 2 Contents Thank you for purchasing this Clarion product. · Please fully read this owner's manual before operating this equipment. · Check the contents of the enclosed warranty card and store it in a safe place with this manual. FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press and hold the desired preset button (numbered one through six on the face of the radio or remote control) for more than two seconds. The station is now stored and can be recalled by pressing the corresponding preset button. Repeat for the remaining five presets on the current band and for presets on the other four bands. NOTE: Multicast stations can be stored as presets, but the unit must be in Digital or Auto reception mode to receive them. Press the [SRC] button on the front panel or remote control to switch to the RADIO source, and HD icom will light when a THD300 is connected. Select a band Press the [BAND] button to change between three FM and one AM bands. Each band stores up to six preset stations. Preset scan Press the [PS/AS] button to scan and play all preset stations for 10 seconds each. Press the [PS/AS] button again to stop scanning and play the current station. Tuning - Seek Tuning Press and hold the [ ] or [ ] button to seek the next/previous station automatically. - Manual Tuning Press the [ ] or [ ] button to move the radio frequency number up or down one step. Automatic store (AS) HD radio multicast channels To tune to an HD Radio multicast channel, tune to the main signal and then press the [MENU] button on the front panel. Select PTY or SUB CH by rotating the [VOLUME] knob and press to confirm. · Select PTY type from the category list by rotating the [VOLUME] knob and press it. · Multi channel is available when a digital signal is detected, the DIGITAL icon will light. If the digital signal becomes Press and hold the [PS/AS] button to select six strong stations and store them in the current band using the auto store function. After entering the stations into memory, the unit will automatically stop at each station for five seconds, allowing you to preview each selection. When using the auto store function, the new stations replace any stations already stored in preset memory. NOTE: You can stop the auto store function at any time by pressing the [PS/AS] button again. iTunes® Tagging The CZ300 offers iTunes® Tagging, which allows the user to "Tag" songs playing on HD RadioTM stations for purchase later through iTunes. When you press the [ISR] button, the unit stores the title and artist song information that can then be transferred to your iPod when connected to the unit. A list titled "Tagged" will appear in iTunes, allowing you the option to purchase your tagged songs. IPOD FULL NOT SUPPORT iPod memory is full An iPod without Tagging function is connected and the [ISR] button is pressed English Note: Tags saved to your iPod can be managed using the iTunes software, available at www. apple. com/itunes. Note: "iTunes® Tagging" function works by connecting THD300 (sold separately). Downloading tags to your iPod iPod compatibility For detailed information on the playable iPod models, see our home page: www. clarion. com Note: To download tags to your iPod, plug an iPod into the unit. All existing tags are automatically transferred to the iPod and deleted from the head unit's memory. If an iPod is connected when a song is tagged, the Tag will be immediately transferred to the iPod. · iPhones can also be connected to this system and "iPod" appearing in this manual should be referred to as "iPod/ iPhone". · This system will not operate or may operate improperly with unsupported versions. Note: When transferring Tags to an iPod, the unit must remain in Radio mode. To purchase tagged songs, you must sync your iPod to iTunes and then click the "Tagged" list on the left side of the iTunes software screen. Click the "View" button for purchasing information. Tagging music Note: To begin tagging music, tune to an HD Radio station. [. . . ] Prepare all articles necessary for installing the source unit before starting. If you have to do any work on the car body, such as drilling holes, consult your car dealer beforehand. 6 mm (M5 screw) Figure 2 Figure 3 5) Installing the Source Unit 1. Place the mounting bracket into the instrument panel, use a screwdriver to bend each stopper of the universal mounting bracket inward, then secure the stopper. [. . . ]