User manual CLARION CZ101EG

[. . . ] CAUTIONS: English 1 This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT". To use this model properly, read this Owner's Manual carefully and keep this manual for your future reference. In case of any trouble with this player, please contact your nearest "AUTHORIZED service station". To prevent direct exposure to the laser beam, do not try to open the enclosure. OBS! Apparaten innehåller laserkomponenten som avger laserstrålning överstigande gränsen för laserklass 1. VAROITUS Suojakoteloa si saa avata. [. . . ] To stop searching, repeat the operation above or press other buttons having radio functions. Manual store When one expected radio station has been detected, press and hold number button 1-6 to store it in the memory. Note: When a station is received, searching stops and the station is played. Recall the stored stations Press one numeric button among 1 to 6 on the panel to select the corresponding stored station. Preset scan Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. When a desired station is tuned in, press the [PS/AS] button again to continue receiving that station. Local seeking When LOCAL seeking is on, only those radio stations with strong radio signal could be received. To open or close LOCAL function, press and hold the [D] button on the front panel, then press [ ] button repeatedly until LO or DX displays on the screen, and rotate the [VOLUME] knob to select Local or Distant mode. Note: · Be careful not to press and hold the [PS/AS] button for 1 second or longer, otherwise the auto store function will begin and the unit starts storing stations. Note: The number of radio stations that can be received will decrease after the local seeking mode is on. 10 Radio Data System Operations English 11 Radio Data System This unit has a built-in "Radio Data System" decoder system that supports broadcast stations transmitting "Radio Data System" data. When using the "Radio Data System" function, always set the radio to FM mode. Note: This function can be used when a regional broadcast of the same network is received. TA (Traffic Announcement) In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode so you can listen to it. * This function can only be used when "TP" appears in the display. When "TP" appears, this means that the "Radio Data System" broadcast station being received has traffic announcement programmes. Setting the TA standby mode If you press the [TA] button, "TA" lights in the display and the unit is set into the TA standby mode until a traffic announcement is broadcast. When a traffic announcement broadcast starts, "TRAF INF" appears in the display. If you press the [TA] button while a traffic announcement broadcast is being received, the traffic announcement broadcast reception is cancelled and the unit goes into the TA standby mode. Cancelling the TA standby mode As "TA" lits in the display, press the [TA] button. The "TA" in the display goes off and the TA standby mode is cancelled. AF function The AF function switches to a different frequency on the same network in order to maintain optimum reception. · AF ON: "AF" indicator appears in the display and AF function turns on. · AF OFF: "AF" indicator disappears in the display and AF function turns off. REG (Regional programme) function When the REG function is ON, the optimum regional station can be received. When this function is OFF, if the regional station area switches as you drive, a regional station for that region is received. * The factory default setting is ON. PTY (Programme Type) This function enables you to listen to a broadcast of the selected programme type even if the unit is on a function mode other than radio. * In the TA standby mode, a TP station has priority over a PTY broadcast station. Notes: · This function is disabled when a national station such as BBC R2 is being received. · The REG function ON/OFF setting is valid when the AF function is ON. Rotate the [VOLUME] knob to select ON or OFF. Selecting PTY Press [MENU] button, then rotate the [VOLUME] knob to select PTY type, press the [VOLUME] knob, the unit begin searching. Manually tuning a regional station in the same network This function is valid when the AF function is ON and the REG function is OFF. CD/MP3/WMA Operations English This unit can play back MP3/WMA files Notes: · If you play a WMA file with active DRM (Digital Rights Management), no audio is output. To disable DRM (Digital Rights Management) When using Windows Media Player 9/10/11, click on Tool -> Options -> Copy music tab, then under Copy settings, unclick the Check box for Copy protect music. Personally constructed WMA files are used at your own responsibility. byte alphabetical letters and numerals (including an extension). [. . . ] Before installation, please make sure proper connections are conducted and the unit operates normally. Use only accessories designed and manufactured for this unit and other unauthorized accessories may result in damage to the unit. DO NOT install the unit in the place where close to hot area to prevent damage to electrical components such as the laser head. Installing the unit more than 30 degree vertically may result in worse performance. [. . . ]