User manual CLARION CAA185

[. . . ] Printed in Japan 2006/12 284-8050-02 CCD Camera Power Supply Box 4. [. . . ] CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL. 2. CCD camera power supply box: ············· 1 4. Bag of accessories: ················· 1 bag 2. Bag of accessories: ················· 1 bag Electro taps: ·············································· 2 Velcro: ······················································· 1 Velcro: ······················································· 1 Connector cable (red): ······························ 1 Connector cable (light green): ·················· 1 Connector cable (black): ··························· 1 Connector cable (red): ······························ 1 Fig. 3 * Thoroughly wipe any dirt from the mounting surface. * Remove the separator from the back of the velcro and apply it to the mounting surface. Fig. 4 CAUTION 1. If harnesses will come into contact with the sharp edges of metal plates, or the like, protect them using grommets or insulation tubes. Before drilling any holes in a vehicle, make sure that there are no electrical wires, brake fluid pipes, or the like, running behind to surface to be drilled. 3. Bag of accessories: ················· 1 bag Tapping screws: ········································ 2 5. [. . . ] From the vehicle side Coupler connected to another piece of equipment Not needed From the unit Stopper Latch Power cable From the unit Hook Power cable Pass the vehicle-side cable through and bend back in the direction of the arrow. [. . . ]