User manual CLARION ARX7170R

[. . . ] Check the contents of the enclosed warranty card and keep it carefully with this manual. This manual includes the operating procedures of the CD changer, MD changer and TV tuner connected via the CeNET cable. The CD changer, MD changer and TV tuner have their own manuals, but no explanations for operating them are described. 11. ESPECIFICACIONES Sintonizador de FM Gama de frecuencias: 87, 9 a 107, 9 MHz Sensibilidad útil: 11 dBf Sensibilidad a 50 dB de silenciamiento: 17 dBf Selectividad de canal alternativo: 75 dB Separación entre canales (1 kHz): 35 dB Respuesta en frecuencia (±3 dB): 30 Hz a 15 kHz Audio Salida máxima de potencia: 160 W (40 W × 4 canales) (EIAJ) Salida media continua de potencia: 14 W × 4, con 4 , de 20 Hz a 20 kHz, 1% de distorsión armónica total Acción de control de graves (30 Hz): ±15 dB Acción de control de agudos (10 kHz): ±10 dB Nivel de salida de línea (cinta 0VU): 0, 7 V Contents 1. [. . . ] Pressing the corresponding preset button recalls the stored radio frequency automatically. Press the corresponding Preset button 9 to recall the stored station. Press and hold one of the Preset buttons 9 for 2 seconds or longer to store that station into preset memory. Instant station recall (ISR) Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. Select the desired station with seek tuning, manual tuning or preset tuning. Press and hold one of the Preset buttons 9 for 2 seconds or longer to store the current station into preset memory. ARX7570z 13 Tape Operations Loading a tape 1. Press OPEN button 1 to access the cassette tape insertion slot behind the FLIP DOWN PANEL. "LOADING" appears in the display and starts playing. When a metal or chrome bias (70µ sec) tape is inserted, the metal tape setting is selected automatically. Ejecting a tape 1. Press OPEN button 1 to access the cassette Eject button & behind the FLIP DOWN PANEL. Close the FLIP DOWN PANEL. CAUTION Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL. Notes: · If the FILP DOWN PANEL does not open fully, gently open with your hand. · The radio mode is selected automatically 4 seconds after Eject button & is pressed. If the auto antenna terminal for this unit is connected, the antenna is extended automatically. Notes: The APC, intro tape scan, tape selection repeat and blank skip may not work properly with tapes of the following qualities: · Tapes on which the recording level is too low. · Tapes on which there are long pauses in the middle of selections. · Tapes on which there are less than 4 seconds of blank space between selections. Dolby noise reduction system The Dolby noise reduction system increases the volume level of high frequency sounds during recording and sets it back to their original level during play. This system reduces hissing noise which is typical of cassette tapes. Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. 1. Each time you press DOLBY NR button 7, the Dolby type changes in the following order: DOLBY B NR ON§DOLBY NR OFF§DOLBY B NR ON. . . . When DOLBY B NR ON is selected, "DOLBY B NR" appears in the display. Intro tape scan The intro tape scan allows the first 10 seconds of all the tracks on the tape to be played. "SCN" lights in the display. ARX7570z 15 Other Handy Functions Setting the clock 1. Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display. Press the right or left side of SEARCH button $ to select "CLOCK". Press the right or left side of SEARCH button $ to select the hour or the minute. [. . . ] Turn the Rotary knob % clockwise to set to "ON" or counterclockwise to set to "OFF". Press ADJ button 4 to return to the previous mode. Recalling a preset station A total of 12 TV stations can be stored (6-TV1 and 6-TV2). This allows you to select your favorite TV stations and store them in memory for later recall. To recall a stored TV station, press the desired Preset button 9 to select that station. Press and hold one of the Preset buttons 9 for 2 seconds or longer to store the current station into the preset memory. Manual memory 1. [. . . ]