User manual CITIZEN CT-S281

[. . . ] This printer conforms to the following Standards: This declaration is applied only for 230V model. IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class B computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference. [. . . ] Only use the printer with devices that have designated solenoid specifications for the cash drawer interface connector. To prevent injury and printer failures from worsening, observe the following: Do not touch the printing surface of the thermal head. , paper cutter, gears, active electrical parts) while the printer is working. Be careful that the printer cover does not entrap your hands or fingers. If the printer emits smoke, an odd smell, or unusual noise while printing, immediately abort the current print session and unplug the printer from the supply outlet. When cleaning the printer, always turn it off and unplug it from the supply outlet. Never use organic cleaning solvent such as alcohol, paint thinner, trichloroethylene, benzene, or ketone. When transporting the printer, remove the paper roll from the printer. The thermal head is at a dangerously high temperature immediately after printing. The CT-S281 is a thermal line printer designed for use with a broad array of terminal equipment including, data, POS, and kitchen terminals. With extensive features, it can be used in a wide range of applications. Auto Cutter provided as a standard unit (performs full cut or partial cut). Paper drop-in mechanism facilitating easy paper handling and head cleaning. When unpacking the printer, confirm that the following are provided: Printer: AC adapter: AC power cord: Sample paper roll: USB cable clamp(USB Interface model): Operation panel(for wall mounting): Quick start guide: CD-ROM: 1 1 1 1 roll 1 1 1 1 The printer models are classified by the following designation method: Model name Optional feature None: No option PX: Paper near-end sensor Case color WH: Cool white BK: Black Destination (Letters + Power cord) J: Japan E: Europe U: USA 00 mm Alphanumeric, International, PC437/850/852/857/858/860/863/ 864/865/866/WPC1252/Katakana/Thai code 18 Kanji (JIS level 1, level 2), Kana, JIS C 6226-1983 User-defined logo/character Types of bar code Line spacing Paper roll Interfacing Input buffer Supply voltage Power consumption AC adapter Weight Outside dimensions Storage temperature and humidity Reliability User-defined characters and logos can be registered in flash memory. uPC-A/E , JAN (EAN) 13/8 columns , ITF , CODE 39 , CODE 128 , CODABAR , CODE 93 , PDF417 , QRCODE 4. 23 mm (1/6 inch) settable with command Thermal paper roll: 58 mm × 83 mm Paper thickness: 0. Connect the AC power cord to the inlet of the of AC adapter, and insert the AC power-cord plug into a suitable wall outlet. Always keep the AC power supply away from other noise generating equipment. If lightning is approaching, unplug the AC power cord from the wall outlet. Otherwise the shield of power cord may be fused resulting in a fire or electric shock. If the printer is not to be used for a long time, leave it disconnected from its supply outlet. For serial interface cable, use the one with the following connection. [. . . ] Status Paper-end Paper near-end Cover open error Cover open error *1 Cutter lock error Head overheat error Memory check error Low voltage error High voltage error Macro execution wait *2 Lights Lights Lights POWER LED Lights Lights Lights Lights Lights Lights Turning off ERROR LED Lights Turning off Lights PAPER LED Lights Lights Turning off Turning off Turning off Turning off Turning off Turning off Turning off Turning off Memory switches can be set manually or by a command. Manual Setting of Memory Switch (Memory SW) The memory switch can be selected, changed, or written by the combination of three actions: pressing the FEED button, pressing and holding the FEED button, and opening or closing the printer cover. With the FEED button pressed and held, turn the printer power on, and then press the FEED button twice. Selecting memory switch When the FEED button is pressed short (within 2 seconds), printing occurs in the order of "Memory SW1" "Memory SW2" "Memory SW3" "Write/Factory Setting" "Memory SW1" . [. . . ]