User manual CITIZEN CT-S2000DC

[. . . ] This printer conforms to the following Standards: This declaration is applied only for 230V model. IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference. [. . . ] If the printer emits smoke, an odd smell, or unusual noise while printing, immediately abort the current print session and unplug the printer from the supply outlet. When cleaning the printer, always turn it off and unplug it from the supply outlet. Never use organic cleaning solvent such as alcohol, paint thinner, trichloroethylene, benzene, or ketone. The thermal head is at a dangerously high temperature immediately after printing. The CT-S2000/CT-S2000DC are thermal line printers designed for use with a broad array of terminal equipment including data, POS, and kitchen terminals. With extensive features, they can be used in a wide range of applications. Drop-in Paper Roll mechanism facilitating easy paper handling and head cleaning. Versatile Roll Capacity with ability to use 83 mm, 80 mm, 60 mm and 58 mm wide paper rolls. When unpacking the printer, confirm that the following are provided: Printer: AC adapter (Option, only for CT-S2000DC): AC power cord (Option, only for CT-S2000DC): Sample paper roll: User's manual (This manual): 1 1 1 1 roll 1 AC power cord CT-S2000 (AC power type) The printer models are classified by the following designation method: Power supply No marking: AC power type (built-in power supply) DC: DC power supply type Interface PA: IEEE1284 & USB RS: RS-232C & USB UB: USB only (Option) Font A Font B Font C Character size Character type User memory Types of bar code Line spacing Paper roll Interfacing Cash drawer interface Input buffer Supply voltage Power consumption AC adapter 23 mm (1/6 inch) Thermal paper roll: 83 -1 mm/80 -1 mm/60 -1 mm/58 -1 mm ×Maximum 102 mm Paper thickness: 65-85 µm Serial (RS-232C compliant), Parallel (IEEE 1284 compliant), USB 2 cash drawers are supported. Operating temperature 5 to 45°C, 10 to 90% RH (No condensation) and humidity Storage temperature and humidity Reliability -20 to 60°C, 10 to 90% RH (No condensation) Print head life: 150 km, 2 × 108 pulses (At normal temperature/ humidity with recommended paper used) Auto cutter life:2 million cuts (At normal temperature/ humidity with recommended paper used) Notes: *1: When paper width is 83, 80, 60, 58 mm *2: The number of printable columns is selectable with a Memory Switch. *4: As each character size includes the space inside the character font, actual character looks smaller. Always keep the AC power supply away from other noise generating equipment. If lightning is approaching, unplug the AC power cord from the wall outlet. Otherwise the shield of power cord may be fused resulting in a fire or electric shock. If the printer will not be used for a long time, leave it disconnected from its supply outlet. Avoid locating the AC power cord in places which may cause tripping or falling. Be careful not to insert the USB interface cable into the cash drawer kick-out connector. For serial interface cable, use the one with the following connection. Avoid locating the interface cable in places which may cause tripping or falling. Confirm the top and bottom of the cash drawer cable connector and insert it into the cash drawer kick-out connector at the back of the printer. 3 Screw the cash drawer's ground wire to the body of the printer. DO NOT connect any other device than the specified cash drawer to the cash drawer kick-out connector. [. . . ] 0 byte, 64K bytes, 128K bytes, 192K bytes, 256K bytes, 320K bytes, 384K bytes * In this printer, Memory Switches 9-3 and 9-4 are not usable. Manual Setting of Memory Switch (Memory SW) The memory switch can be selected, changed, or written by the combination of three actions: pressing the FEED button, pressing and holding the FEED button, and opening or closing the printer cover. With the FEED button pressed and held, turn the printer power on, and then press the FEED button twice. (No indication for 0/1 with memory switch 7 through 10) Selecting memory switch When the FEED button is pressed short (within 2 seconds), printing occurs in the order of "Memory SW1" "Memory SW2" "Memory SW3" . [. . . ]