User manual CITIZEN CT-S2000

[. . . ] LINE THERMAL PRINTER MODEL CT-S2000/CT-S2000DC User's Manual WEEE MARK En Ge Fr Sp It Du Da Por Pol Declaration of Conformity This printer conforms to the following Standards: Low Voltage Directive 73/23/EEC, 93/68/EEC and the EMC Directive 89/336/EEC, 92/31/EEC, 93/68/EEC. LVD : EN60950-1 EMC : EN55022 EN61000-3-2 EN61000-3-3 EN55024 Class A This declaration is applied only for 230V model. IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference. CAUTION: Use shielded cable for this equipment. Sicherheitshinweis Die Steckdose zum Anschluß dieses Druckers muß nahe dem Gerät angebracht und leicht zugänglich sein. For Uses in Canada This Class A digital apparatus complies with Canadian ICES-003. [. . . ] Versatile Roll Capacity with ability to use 83 mm, 80 mm, 60 mm and 58 mm wide paper rolls. Equipped with USB interface as standard Replaceable interface board. High-speed parallel interface (Parallel interface model) Built-in cash drawer interface. Error indication is available with LED or buzzer. --9-- 1. 2 Unpacking When unpacking the printer, confirm that the following are provided: Printer: 1 AC adapter (Option, only for CT-S2000DC): 1 AC power cord (Option, only for CT-S2000DC): 1 Sample paper roll: 1 roll User's manual (This manual): 1 AC power cord CT-S2000 (AC power type) User's manual (This manual) Sample paper roll AC adapter (Option) CT-S2000DC (DC power supply type) AC power cord (Option) User's manual (This manual) Sample paper roll 1. 3 Model Classification The printer models are classified by the following designation method: CT - S2000 Power supply No marking: AC power type (built-in power supply) DC: DC power supply type Interface PA: IEEE1284 & USB RS: RS-232C & USB UB: USB only (Option) RS E - BK Label/Black mark No marking: Standard L: Label M: Black mark Body case color WH: Cool white BK: Black GR: Dark Grey Character set, AC cable, E: Europe U: USA -- 10 -- 1. 4 Basic Specifications Item Model Print method Print width Dot density Print speed Number of print columns *2 *1 Specifications CT-S2000 PA, CT-S2000 RS, CT-S2000DC PA, CT-S2000DC RS Line thermal dot print method 80 mm/640 dots, 72 mm/576 dots, 54. 5 mm/436 dots, 54 mm/432 dots 8 × 8 dots/mm (203 dpi) 220 mm/s (Fastest, print density 100 %), 1760 dot lines/s Number of print columns Dot configuration (columns) (Dot) Paper width Font 83mm 53 71 80 80mm 48 64 72 60mm 36 48 54 58mm 35 46 52 12 × 24 9 × 24 8 × 16 Font A Font B Font C Character size *4 Font A: 1. 50 × 3. 00 mm Font B: 1. 13 × 3. 00 mm Font C: 1. 00 × 2. 00 mm Alphanumeric, International, PC437 PC850/852/857/858/860/863/864/ 865/866/WPC1252/Katakana/Thai code 18 384 KB (Capable of registering user-defined characters and logos) UPC-A/E, JAN (EAN) 13/8 columns, ITF, CODE 39, CODE 128, CODABAR, CODE 93, PDF417, QR Code 4. 23 mm (1/6 inch) Thermal paper roll: 83 +0 mm/80 +0 mm/60 +0 mm/58 +0 mm -1 -1 -1 -1 ×Maximum 102 mm Paper thickness: 65-85 µm Serial (RS-232C compliant), Parallel (IEEE 1284 compliant), USB 2 cash drawers are supported. 70W (in normal printing) Rated input: AC 100 to 240 V, 50/60 Hz, 150 VA Rated output: DC 24 V, 2A Model 35AD1 for CT-S2000 / Model 35AD2 for CT-S2000DC CT-S2000:Approx. 1. 8 kg 147 (W) × 207 (D) × 147 (H) mm Character type User memory Types of bar code Line spacing Paper roll Interfacing Cash drawer interface Input buffer Supply voltage Power consumption AC adapter Weight Outside dimensions Operating temperature 5 to 45°C, 10 to 90% RH (No condensation) and humidity Storage temperature and humidity Reliability -20 to 60°C, 10 to 90% RH (No condensation) Print head life: 150 km, 2 × 108 pulses (At normal temperature/ humidity with recommended paper used) Auto cutter life:2 million cuts (At normal temperature/ humidity with recommended paper used) *3 Safety standard UL, C-UL, FCC Class A, TÜV-GS, CE Marking -- 11 -- Notes: *1: When paper width is 83, 80, 60, 58 mm *2: The number of printable columns is selectable with a Memory Switch. Printer varies partly in the number of columns depending on printer specifications. *3: This rating is obtained by the use of specified AC adapter (35AD1 or 35AD2). *4: As each character size includes the space inside the character font, actual character looks smaller. 2. EXPLANATION OF PRINTER PARTS 2. 1 Printer Appearance Printer cover Cover open button Power switch Operation panel Rear connector (Front view) (Rear view) Printer cover Paper is loaded under this cover. Cover open button To refill or replace paper, open the printer cover by lifting the cover open button. Power switch This switch turns the printer power ON/OFF. -- 12 -- Operation Panel POWER LED FEED button ERROR LED POWER LED Illuminated when the printer power is on and off when the printer power is off. ERROR LED Illuminated or blinks when paper is empty or in case of failure. FEED button Pressing this button once causes the paper to feed one line. In case of auto cutter error, press the FEED button after removing the cause of the error. See 4. 6 Error Indication Rear Connectors Interface connector (Serial, parallel, etc. ) Cash drawer kick-out connector Power connector (DC power supply type) AC inlet Interface board (AC power type) mounting screws USB connector Interface connector (Serial, parallel, etc. ) Connects to the interface cable. Cash drawer kick-out connector Connects to the cable from the cash drawer. AC inlet (AC power type) Connects to AC power cord Power connector (DC power supply type) Connects to the cable from AC adapter. -- 13 -- 2. 2 Printer Cover Inside Paper feed roller Feeds paper as part of print mechanism. Paper-near-end sensor Detects near paper end, change position in accordance with the outer diameter of paper core. Cutting method is selectable between partial cut and full cut with a command. Print (thermal) head Prints characters and/or graphic data on thermal paper. Paper-end sensor Stops printing when this sensor detects paper end. Paper-near-end sensor Paper-end sensor Print (thermal) head Paper feed roller Auto cutter 2. 3 Other Built-in Functions Buzzer This printer has a built-in buzzer. [. . . ] If the blade still does not move and the cover cannot be opened, contact your Citizen Systems dealer. Thermal head overheat When you print dense characters or dark image, the head temperature rises. If the head temperature exceeds a specified level, the printer stops printing operation and waits till the head temperature is lowered. When the head temperature is lowered, printing resumes automatically. -- 23 -- Power switch operation error If you turn power on again just after powering off, an error may occur. [. . . ]