User manual CITIZEN CH605
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CITIZEN CH605. We hope that this CITIZEN CH605 user guide will be useful to you.
Manual abstract: user guide CITIZEN CH605
Detailed instructions for use are in the User's Guide.
[. . . ] Keep the center of the cuff at the level of your heart, and do NOT move your arm or talk.
· DO NOT measure blood pressure after the cuff has been on for a few minutes, as your arm will have built up higher blood pressure, and you will not get a valid reading.
English Español Português Italiano
PRECAUTION FOR USE
Precaution for use
· If you suffer form heart disease, high blood pressure or other circulatory disease, please consult your doctor first. · If you feel abnormal pressure of the cuff during use or any other irregularity, reduce the pressure by immediately switching off the power or removing the batteries and consult the sale outlet where you purchased. · If you think the measured value is abnormal or if measuring makes you fell unwell, discontinue use and consult your doctor. · Measurement of blood pressure may not be possible for someone with a weak pulse or arrhythmia. [. . . ] · The memory is erased if the batteries are removed for replacement, etc. and a record should be kept of any necessary data.
Deutch Français
- Eng 3 -
Precaution for maintenance
· Do NOT store the blood pressure meter where it will be exposed to direct sunlight, high temperature (over 60°C), low temperature (below - 20°C), high relative humidity (over 95%) or in a dusty place . · Do NOT expose the blood pressure meter to undue force or vibration, or drop it. · Never wipe the blood pressure monitor with thinner or benzene, as they may damage it. · When the monitor is very dirty, wipe it clean with a cloth moistened with Sterilizing alcohol or a neutral detergent, and then wipe it with a dry cloth. Do NOT use thinner or benzene.
Cleaning method of Cuff
After cleaning the cuff with a neutral detergent, lightly rinse it with water and let it air dry. Also, be careful not to get water into the air hose.
Protect the natural environment
Please help protect the natural environment by respecting national and/or local recycling regulations when disposing of the batteries and the products at the end of their useful lives.
Nature and frequency of maintenance
This product is designed for use over an extended period of time; however it is generally recommended that it be inspected every two years to ensure proper function and performance.
- Eng 4 -
WHO blood pressure classifications
Standard for assessment of high or low blood pressure without regard to age, have been established by the World Health Organization (WHO), as shown in the chart.
SYSTOLIC (mmHg)
180
Reference European standard:
This products complies with EN instructions 93/ 42/EEC (Medical Device Directive) and with the following standards: EN 1060:1995 "Noninvasive Sphygmomanometers, Part 1 General Requirements" and EN 1060: 1997 "Noninvasive Sphygmomanometers, Part 3 Supplementary Requirements for Electromechanical Blood Pressure Measuring Systems".
English Español Português Italiano
Hypertension (severe)
160 140 130 120
Hypertension (moderate) Grade 1 Hypertension (mild) High-Normal Normal Optimal
80 85 90 100 110 DIASTOLIC
Manufacturer:
Name: Living Science (Shenzhen) Co. , Ltd. Address: Shun Mu Ku Road, Ping Hu County, Shenzhen, Long-Kang Town, China
European Representative:
Name: Innovative business promotion GmbH. Address: Huttenstraße 4 D-07743 Jena
Deutch
(mmHg)
Definition and Classification of Blood Pressure Lebels Note: When a patient's systolic and diastolic blood pressure fall into different categories, the higher category should apply.
Français
- Eng 5 -
DEVICE DESCRIPTION
1. Name of the parts
LCD display
DA TE
CH 60 7
P
mm Hg
M
TIM
mmY S Hg .
ST AR T/
S
E
T E S
Setting button Mode button Recall memory button
ST OP
mm A Hg .
DI
/ M LSE IN
PU
M
O
D
E
Y OR EM M
Wrist cuff
Start/Stop button
Batteries "AAA" 1. 5V×2
Carrying case
- Eng 6 -
English
2. Description of display symbols
Month Date Hour Minute
Español Português Italiano
Afternoon time Measuring pressure symbol Blood pressure unit Battery weak displa y Error symbol Memory record Pulse rate Diastolic rate Systolic rate
Deutch Français
Pulse symbol
- Eng 7 -
BATTERY REPLACEMENT
1. 3) If blood pressure tends to be on the high level, the air pressure will automatically increase again to the required level for measurement.
- Eng 10 -
Do not move or talk while taking the blood pressure measurement. 4) When pressurization is completed, the automatic air release system will gradually reduce cuff pressure, and measuring mark "Heartmark" will flash on the display indication that measuring is in progress. 5) After taking blood pressure measurement, the systolic and diastolic pressure with pulse rate is displayed on the display for 1 minute. 6) Unless an error is generated, the measurement results are automatically stored in memory. * When there are already 99 sets of results in memory, the oldest one is automatically erased and overwritten with the newest. Display of the measurement result will continue until power is turned off.
3. Turn Power off
English Español Português Italiano Deutch
When the Start/Stop switch is pressed, the display will be changed over to the date/watch only indication and the power will be totally turned off approximately one minute later.
CAUTION
To discontinue a measurement for any reason, press the "START/STOP" switch. Automatic power-off function
If the unit is left on after measurement, an automatic power-off function turns the power off after approximately 1 minute. To continue measurement, press the "START/STOP" switch turning the unit on. After, wind the wristlet around your left wrist.
Français
- Eng 11 -
5. Memory recall
You can recall stored data by pressing the "Memory" switch, except when performing a measurement. [. . . ] · Up to 99 sets of measurement results are automatically stored in memory, and memory cell No. · Press "Memory" switch, the memory cell number with the stored measurement results (Systolic / Diastolic and Pulse with Date/Time) are displayed for 1 minute. * Pressing "Memory" button, nothing will appear on the display if there is no data in the memory. · If the "Memory" switch is pressed further, the old date are indicated in the order of the time series. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CITIZEN CH605
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CITIZEN CH605 will begin.