User manual CHARTER OAK E700

[. . . ] Slide the paper cassette into the machine until it locks into place. Install Mains Power Cord and Telephone Line Cord 7 (Example for the U. K. ) Sharing a Single Line with a Telephone Answering Device (TAD) or an External Telephone TAD TAD Maximum Paper Height Guide (Example for the U. K. ) External Telephone Extension Telephone Mains Power Cord Telephone Line Cord Complete reading this guide before connecting the Parallel or USB cables. Note: If you are using an external answering machine, “TAD” should be selected as the receive mode in Step 8. 8 100% Selecting Receive Mode 9 Set Date and Time 1 10 Set Station ID 1 Choose the mode that best suits your needs by pressing Receive Mode repeatedly until the screen displays the setting you want to use. FAX ONLY AUTO A. Press Menu, , 2 . 1. DATE/TIME YEAR:XX ENTER & SET KEY 2. STATION ID FAX: ENTER & SET KEY For use with a dedicated fax line. Every call is answered as a fax. 100% FAX/TEL (with an External Telephone) AUTO B. Enter the last two digits of the year and press Set. MONTH:XX ENTER & SET KEY B. [. . . ] Enter your fax number, then press Set. TEL: ENTER & SET KEY C. Enter your telephone number, then press Set. NAME: ENTER & SET KEY For receiving fax and voice calls on one line. If the call is a voice call, the machine will pseudo ring to alert you to pick up the phone. TAD:ANSWER MACH. Enter two digits for the month and press Set. DAY:XX ENTER & SET KEY D. Enter two digits for the day and press Set. TIME:XX:XX ENTER & SET KEY D. Enter your name using the dial pad and the chart below, then press Set. For more details, see Entering Text in Owner’s Manual. Press Key 2 3 4 5 6 7 8 9 once A D G J M P T W twice B E H K N Q U X three times four times five times C F I L O R V Y 2 3 4 5 6 S 8 Z A D G J M 7 T 9 For use with an external answering device. Fax messages are printed. 100% MANUAL (with an External Telephone) AUTO E. Note: If you can’t step forward, press Stop/Exit and repeat from Step A. You control the phone line and must answer every call yourself. For more details, see Receive Mode Settings in Owner’s Manual. Note: If you can’t step forward, press Stop/Exit and repeat from Step A. Follow the instructions on the screen. ( For Windows® 2000 Professional User ) ( For Windows® 95/98/98SE/Me Users ) 1. In the Connect Cable window, click Next. 2. When the above screen appears, click Finish and wait as the PC restarts Windows® and continues the installation. 1. In the Connect Cable window, click Next. 2. When the above screen appears, Click Finish and wait as the PC restarts Windows® and continues the installation. 3. Click Yes to have the Control Centre loaded each time Windows® is started. Please see Note *3. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. 3. When the Digital Signature Not Found dialog boxes appear, click Yes to install the driver. 4. Click Yes to have the Control Centre loaded each time Windows® is started. Please see Note *3. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. Step 4. Step 6. For USB interface cable users Turn on the MFC by plugging in the power cord. Connect the Filter Core and Cable Tie to the USB cable, and then connect the MFC to your PC with the USB cable. (It will take a few seconds for the installation screen to appear. ) The installation of the Brother driver will automatically start. Follow the instructions on the screen. ( For Windows® 98/98SE/Me Users ) ( For Windows® 2000 Users ) 1. In the Add Printer Wizard window, select BRUSB: USB Printer Port, and then click Next. 2. Accept the default Printer name by selecting Yes, and then click Next. 3. Select Yes (recommended), and then click Finish. A test page will be printed so you can check the print quality. 1. When the Digital Signature Not Found dialog boxes appear, click Yes to install the driver. 4. If the test page is printed correctly, click Yes. If you click No, follow the prompts on the screen to correct the problem. 5. Select Yes to restart your computer, and then click Finish. 6. Click Yes to have the Control Centre loaded each time Windows® is started. Please see Note *3. 2. Select Finish to restart your computer. 3. Click Yes to have the Control Centre loaded each time Windows® is started. [. . . ] If you click No, follow the prompts on the screen to correct the problem. 5. Select Yes to restart your computer, and then click Finish. 6. Click Yes to have the Control Centre loaded each time Windows® is started. Please see Note *3. 2. Select Finish to restart your computer. 3. Click Yes to have the Control Centre loaded each time Windows® is started. Please see Note *3. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. –3– For Windows NT® Workstation Version 4. 0 Users Step 1. Check that your computer is turned on. Step 3. Select Yes to restart your computer, and then click Finish. You must be logged on as the Administrator. Step 2. A. [. . . ]