User manual CHAMBERLAIN TCTRX2ED

[. . . ] The built-in time switch offers you additional facilities: You can program fixed daily opening and closing times for your roller shutters or awnings or you can program different opening and closing times for each day of the week. You can also arrange for the roller shutters to open automatically in the mornings and close them manually in the evenings as well as vice versa. With the built-in radio receiver control signals from other Chamberlain switches can be received. In this way you can for example control a roller shutter from the comfort of your sofa. [. . . ] The roller shutters will now open and close each day at the programmed times. In program mode "A1" the roller shutters open and close each day automatically at the programmed times. In program mode "A7" the roller shutters open and close automatically each weekday at individually programmed times. Automatic opening and closing of the roller shutters at different times (according to the day of the week) 8. For each weekday you can also enter different opening and closing times. Enter an opening time then confirm the hours and minutes with the UP key. Then enter a closing time and again confirm the hours and minutes with the UP key. Now select all the other weekdays and program the opening and closing times. The roller shutters will now open and close on each day individually according to the programmed times. If instead of entering a time you enter a double hyphen (--) this will deactivate the opening or closing time. You can use this function to automatically close the roller shutters in the evenings so that you can then open them manually in the morning or vice versa. Under the menu option Events you can easily switch between the two automatic programs. Under the menu option Autom you can switch off the automatic functions completely. The manual commands always take precedence over those programmed into the TCTRX2ED. In other words the TCTTX2ED can be used as a central switch which controls several roller shutters at the same time. 2 In the menu option Radio (under Mode) you can now select which radio signals are to be received. Select on to receive the signals from the wall switch and the optical sensor. Select Buttons if only the manual control commands from the TCTX2ED and the TCTTX2ED are to be received. The learnt links between the TCTX2ED, TCTTX2ED, the optical and glass breakage sensor TCLS1ED and the TCTRX2ED can also be deleted again. With the TCLS1ED you can control your roller shutters according to the level of brightness. [. . . ] This warranty does not cover non-defect damage caused by unreasonable use (including use not in complete accordance with Chamberlain's instructions for installation, operation and care; failure to provide necessary maintenance and adjustment; or any adaptations of or alterations to the products), labor charges for dismantling or reinstalling of a repaired or replaced unit or replacement batteries. A product under warranty which is determined to be defective in materials and/or workmanship will be repaired or replaced (at Chamberlain's option) at no cost to the owner for the repair and/or replacement parts and/or product. Defective parts will be repaired or replaced with new or factory rebuilt parts at Chamberlain's option. If, during the warranty period, the product appears as though it may be defective, contact your original place of purchase. [. . . ]