User manual CHAMBERLAIN T3EML

[. . . ] Set switching time hour with the UP or DOWN keys By holding down the UP or DOWN key the hour display counts to the next largest number divisible by 5 and then keeps counting up in steps of 5. Acknowledge with the middle key The current hour display for the UP time is shown flashing. The UP arrow, the 1 for Monday and the hour display are shown statically Set the switching time minute with the UP or DOWN keys By holding down the UP or DOWN key the minute display counts to the next largest number divisible by 5 and then keeps counting up in steps of 5. Acknowledge with the middle key The switching time for the next weekday can be set as described under 4. [. . . ] 1 Setting the sensor Press the middle key (mode key) for at least 2 seconds. Set with the UP and DOWN keys Sun: 9= Strongest adjustable insolation (sun's radiation) level before a reaction takes place (full sun). 1= A reaction takes place even in the case of brightness (light without direct sun) OFF Sensor not active Factory setting = 4 Press the middle key (mode key) Set the reaction for twilight 9 = Still very bright 1 = Very dark (almost night) Factory setting = 4 Press the middle key (mode key) for at least 2 sec. Weekly clock with optical control system Flush-fitted installation 7 for UP; 7 fo down 1 sun value, 1 twilight value Sun approx. 2 The parts are simply plugged together and can be separated again by carefully withdrawing them (the frame is suitable for the Busch-Jäger alpha nea® range). 2 These safety alert symbols mean Caution - a personal safety or property damage instruction. 3 Failure to comply with the following instructions may result in serious personal injury or property damage. 6 Installation and wiring must be in compliance with your local building and electrical codes. You can easily control your roller shutters with the T3EML time switch from Chamberlain. The built-in time switch offers you additional facilities: You can program fixed daily opening and closing times for your roller shutters or awnings or you can program different opening and closing times for each day of the week. With the optical cable sensor you can even have your roller shutters opened or closed according to the level of brightness. This saves energy and protects your room from the sun's radiation when it is too strong. Operation Following expert installation you can immediately carry out all the necessary settings. Press the middle key once, twice or three times until the symbol AUTO appears on the display. The clock symbol, the hour and minute displays and the colon are shown. Set weekday with the UP or DOWN keys The chosen weekday flashes (1= Monday, 2= Tuesday, 3= Wednesday, 4= Thursday, 5= Friday, 6= Saturday, 7= Sunday). the clock symbol , the set weekday , the minute display and the colon are all shown statically. Set hours with the UP or DOWN keys By holding down the UP or DOWN key the hour display counts to the next largest number divisible by 5 and then keeps counting up in steps of 5. The clock symbol, the set weekday, the hour display and the colon are shown statically. Set the time in minutes with the UP or DOWN key By holding down the UP or DOWN key the minute display counts to the next largest number divisible by 5 and then keeps counting up in steps of 5. [. . . ] A product under warranty which is determined to be defective in materials and/or workmanship will be repaired or replaced (at Chamberlain's option) at no cost to the owner for the repair and/or replacement parts and/or product. Defective parts will be repaired or replaced with new or factory rebuilt parts at Chamberlain's option. If, during the warranty period, the product appears as though it may be defective, contact your original place of purchase. This warranty does not affect the purchaser's statutory rights under applicable national legislation in force nor the purchaser's rights against the retailer arising from their sales/purchase contract. [. . . ]