User manual CHAMBERLAIN 8002E INSTALLATION

[. . . ] For use with the following RF modules: To operate the control board via radio, a radio module must first be installed in slots CN1/CN2. [. . . ] Select a location which allows clearance for opening the cover, and space for the antenna (as far from metal structures as possible). An additional cable extension (86LM) is available to improve the range The transformer (Model 23009E) must be plugged into the wall within two meters of the receiver, to allow the wire to reach the receiver terminals. Fasten the receiver securely with screws through the corner holes which are located under the cover. Connect the cable of the second wall-button ( if you have to operate 2 doors) to the terminals . In case there is no wallbutton or keyswitch, consult the manual of your garage door opener. PROGRAMMING THE RECEIVER TO ACCEPT YOUR TRANSMITTER CODE Activate the opener only when door is in full view, free of obstruction and properly adjusted. Now the opener will operate when the remote control push button is pressed. If you release the remote control push button before the indicator lights flash, the opener will not accept the code. [. . . ] I, the undersigned, hereby declare that the equipment specified above and any accessory listed in the manual conforms to the above Directives and Standards. [. . . ]