User manual CHAMBERLAIN 7433E

[. . . ] Children operating or playing with a garage door opener can injure themselves and others. Do not allow children to operate the door control push button or the remote control transmitters. [. . . ] Select a location for the receiver which allows access to the terminals and space for the antenna (as far from metal structures as possible and preferably with the antenna in an upright position). Fasten the receiver securely with screws through the two holes provided in the cover flanges. To use the receiver to operate three garage door openers with a multi-function remote control: Garage door opener #1 (without transformer). See Figure 1: Connect paired grey receiver wires to the opener terminal screws used for the wall push button. Also, connect bell wire to receiver terminal 1 and opener terminal screw 1; and receiver terminal 2 and opener terminal screw 3. Also, connect paired grey receiver wires to opener terminal screws used for wall push button. Garage door opener #2: Connect paired yellow wires from the receiver to the opener terminal screws used for the wall button. Garage door opener #3: Connect paired blue wires from the receiver to the opener terminal screws used for the wall button. Opener #1 will now operate when the selected remote control push button is pressed. Repeat the procedure with the other two remote push buttons to program the second opener ("smart" button "B") and the third opener ("smart" button "C"). [. . . ] 7413E and 7433E, when installed and maintained according to all the Manufacturer's instructions in combination with a Garage Door Opener and Garage Door, which have also been installed and maintained according to all the Manufacturer's instructions, meets the provisions of EU Directive 89/392/EEC and all ammendments. I, the undersigned, hereby declare that the equipment specified above and any accessory listed in the manual conforms to the above Directives and Standards. [. . . ]