User manual CATA X-MART GUIDE INSTALLATION

[. . . ] Incorrect installation may damage property or cause harm to people or animals. To allow adequate ventilation and to avoid overheating of the surrounding surfaces the hob should be positioned as follows: • At a minimum distance of 40 mm from the back panel or any other vertical surfaces. • So that a minimum distance of 10 mm is maintained between the installation cavity and the cabinet underneath. GB Fixing Built-in appliance The appliance must be installed on a perfectly level supporting surface. [. . . ] EXTENDABLE PLATE ON button INCREASE POWER button PROGRAMME TIMER display COOKING ZONE PROGRAMMED indicator light CONTROL PANEL LOCK indicator light COOKING ZONE PROGRAMMED indicator lights COOKING ZONE SELECTOR button EXTENDABLE PLATE ON indicator light CONTROL PANEL LOCK button POWER indicator ON/OFF button PROGRAMME TIMER button REDUCE POWER button • INCREASE POWER button switches on the hotplate and controls the power (see Start-up and use). • REDUCE POWER button controls the power and switches off the hotplate (see Start-up and use). • POWER indicator provides a visual display for the current heat level. • PROGRAMME TIMER button controls the cooking programme times (see Start-up and use). PROGRAMME TIMER display shows the programme chosen (see Start-up and use). • COOKING ZONE PROGRAMMED indicator lights show which cooking zones are being used during a cooking programme (see Start-up and use). • CONTROL PANEL LOCK button prevents accidental changes to the hob settings (see Startup and use). • CONTROL PANEL LOCK indicator light shows the control panel has been locked (see Start-up and use). • EXTENDABLE HOTPLATE ON button switches the extendable hotplate on or off (see Start-up and use). • EXTENDABLE HOTPLATE ON indicator light shows that the extendable hotplate has been switched on. • COOKING ZONE SELECTOR button shows a particular cooking zone has been selected and therefore various adjustments are possible. Press the button for a few moments, the indicator light will switch off and the lock function will be removed. Switching on the extendable cooking zones • Double hotplate: button to switch on the smaller 1. If the second zone is circular: press the or button to switch on (or off) the second cooking zone. If the cooking zone is circular: Press the button to switch on (or off) the whole cooking zone (triple hotplate). If the control panel lock has been activated, the controls will continue to be locked even after the hob is switched on again. In order to switch the hob on again, you must first remove the lock function. 18 Practical advice on using the appliance To obtain the best results from your hob: • Use flat-bottomed pans to ensure that they adhere to the cooking zone perfectly. Safety devices Residual heat indicators While the temperature of the cooking zone remains above 60°C, even after the programme has finished, the residual heat indicators placed near the relevant cooking zone remain lit to prevent the risk of burns. Inactive function If the hob is on but has not been used for approximately 2 minutes, the control panel will be locked. If this continues for an additional 4 minutes, the hob will switch off automatically. Overheating protection Prolonged use of the hob can cause the electronic components to overheat. [. . . ] An indicator light provides a warning when residual heat is present (see Start-up and use). • Keep any object which could melt away from the hob, for example plastic and aluminium objects, or products with a high sugar content. Be especially careful when using plastic film and aluminium foil or packaging: if placed on surfaces that are still hot, they may cause serious damage to the hob. Disposal • When disposing of packaging material: observe local legislation so that the packaging may be reused. [. . . ]