User manual CASIO DH-100

[. . . ] If anything is missing, contact your original retailer. Digital camera Rechargeable lithium ion battery (NP-130) Charger unit (BC-130L) To attach the strap to the camera Attach strap here. * The shape of the power cord plug varies according to country or geographic area. Power cord Strap USB cable AV cable CD-ROM Quick Start Guide High Speed Continuous Shutter/ High Speed Movie Shooting Guide 2 Read this first! · The contents of this manual, the bundled Quick Start Guide, and the bundled High Speed Continuous Shutter/High Speed Movie Shooting Guide are subject to change without notice. · The contents of this manual have been checked at each step of the production process. Feel free to contact us if you notice anything that is questionable, erroneous, etc. [. . . ] Use [8] and [2] to select "Del Group Images" and then press [SET]. Use [8] and [2] to select "Yes", and then press [SET]. 103 Viewing Snapshots and Movies Dividing Up a CS Group Use the following to divide up a CS Group into individual images. . 5. While a CS group is displayed or while the images of a CS group are scrolling on the monitor screen, press [MENU]. Use [8] and [2] to select "Divide Group" and then press [6]. Use [8] and [2] to select "Divide" and then press [SET]. · To divide up other CS group files, repeat steps 4 and 5. . Dividing Up All CS Groups IMPORTANT! · Once a CS group is divided, it cannot be regrouped. 1. 5. While a CS group is displayed or while the images of a CS group are scrolling on the monitor screen, press [MENU]. Use [8] and [2] to select "Divide Group" and then press [6]. Use [8] and [2] to select "Divide All Groups" and then press [SET]. Use [8] and [2] to select "Yes", and then press [SET]. 104 Viewing Snapshots and Movies Copying a CS Group Image Use the following procedure to copy an image in a CS group to a location outside of the group. 1. While CS image playback is in progress or paused (toggle by pressing [SET]), press [2]. This will display the "CS Frame Edit" menu. 2. 4. Use [8] and [2] to select "Copy", and then press [SET]. You can use [8] (DISP) to change the display contents. 108 Viewing Snapshots and Movies Viewing High-quality Movies on a Hi-Vision Television Use a commercially available HDMI cable to connect the camera to the TV. For information about playback, see the procedure starting from step 2 under "Viewing Snapshots and Movies on a TV Screen" on page 107. · Use a commercially available HDMI cable that is marked with the logo shown to the right. HDMI connector HDMI cable (commercially available) HDMI output (Mini) HDMI input HDMI mini connector Terminal cover IMPORTANT! · Output to a TV is not supported while the camera is in the REC mode. NOTE · Use a HDMI cable that with a plug that is compatible with the camera's HDMI mini connector on one end, and a plug that is compatible with your TV's HDMI connector on the other end. · Proper image and/or audio output and other operations may not be possible with some devices. · Connecting the camera to the HDMI connector of another device can damage both the camera and the other device. · Make sure that the camera is turned off before plugging in or unplugging the cable. Check the user documentation that comes with the TV for information about requirements before plugging into or unplugging from the TV. · When cables are connected to both the USB/AV port and the HDMI output connector, the HDMI output connector connection is given priority. · Disconnect the HDMI cable when you are not using HDMI output. The camera's monitor screen may not operate normally while the HDMI cable is connected. · Some TVs may not be able to output images and/or audio correctly. [. . . ] 6 Step 5: Use Dynamic Studio to expand use of Dynamic Photo images to other applications. A totally new way to enjoy digital photography! Dynamic Photo provides an easy way to insert built-in subjects into snapshots and movies for a whole new way to enjoy digital imaging. You can create a Dynamic Photo image by inserting a built-in moving subject into a background image (snapshot or movie). Before performing the following steps, you should record the background image (snapshot or movie) into which you want to insert the moving subject. [. . . ]