User manual CASIO CTK-WK200 APPENDICE

[. . . ] If anything is missing, contact your original retailer. Digital camera Rechargeable lithium ion battery (NP-130) Charger unit (BC-130L) To attach the strap to the camera Attach strap here. * The shape of the power cord plug varies according to country or geographic area. Power cord Strap USB cable AV cable CD-ROM Basic Reference 2 Read this first! · The contents of this manual are subject to change without notice. · The contents of this manual have been checked at each step of the production process. Feel free to contact us if you notice anything that is questionable, erroneous, etc. [. . . ] Use [8] and [2] to select "Divide" and then press [SET]. · To divide up other CS group files, repeat steps 4 and 5. . Dividing Up All CS Groups IMPORTANT! · Once a CS group is divided, it cannot be regrouped. 1. 5. While a CS group is displayed or while the images of a CS group are scrolling on the monitor screen, press [MENU]. Use [8] and [2] to select "Divide Group" and then press [6]. Use [8] and [2] to select "Divide All Groups" and then press [SET]. Use [8] and [2] to select "Yes", and then press [SET]. 104 Viewing Snapshots and Movies Copying a CS Group Image Use the following procedure to copy an image in a CS group to a location outside of the group. 1. While CS image playback is in progress or paused (toggle by pressing [SET]), press [2]. This will display the "CS Frame Edit" menu. 2. 4. Use [8] and [2] to select "Copy", and then press [SET]. Use [8] and [2] to select "Copy", and then press [SET]. NOTE · The functions below cannot be performed on snapshots inside a CS group. Before using either of these functions, perform the above procedure to copy the image first. White Balance, Brightness, Trimming, Rotation, Resize 105 Viewing Snapshots and Movies Zooming an On-screen Image 1. 2. In the PLAY mode, use [4] and [6] to scroll through the images until the one you want is displayed. · Connecting the camera to the HDMI connector of another device can damage both the camera and the other device. · Make sure that the camera is turned off before plugging in or unplugging the cable. Check the user documentation that comes with the TV for information about requirements before plugging into or unplugging from the TV. · When cables are connected to both the USB/AV port and the HDMI output connector, the HDMI output connector connection is given priority. · Disconnect the HDMI cable when you are not using HDMI output. The camera's monitor screen may not operate normally while the HDMI cable is connected. · Some TVs may not be able to output images and/or audio correctly. When you first start displaying images, set the TV volume control at a relatively low level and then adjust it as required. 109 Viewing Snapshots and Movies . Selecting the HDMI Terminal Output Method (HDMI Output) Procedure [MENU] * Set Up Tab * HDMI Output Use this setting to select the digital signal format when connecting to a TV with an HDMI cable. Auto 1080i 480p 576p This setting will cause the format to change automatically in accordance with the connected TV. 1080i format output* 480p format output 576p format output * 1080i corresponds to 1080 60i, but not 1080 50i. [. . . ] 6 Step 5: Use Dynamic Studio to expand use of Dynamic Photo images to other applications. A totally new way to enjoy digital photography! Dynamic Photo provides an easy way to insert built-in subjects into snapshots and movies for a whole new way to enjoy digital imaging. You can create a Dynamic Photo image by inserting a built-in moving subject into a background image (snapshot or movie). Before performing the following steps, you should record the background image (snapshot or movie) into which you want to insert the moving subject. [. . . ]