User manual CARRIER 50QKACC

[. . . ] Warning -- Do not use the epilator,  an attachment or the adapter if it is damaged. -- If the adapter is damaged, always have it replaced with one of the original type in order to avoid a hazard. Do not cut off the adapter to replace it with another plug, as this causes a hazardous situation. -- The epilator is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. [. . . ] The appliance is waterproof and can be safely used in the shower or bathtub. -- Dry: If you epilate dry, epilation is easier just after taking a bath or shower. -- General: We advise you to epilate in the evening, as skin irritation usually disappears overnight. -- General: Epilation is easier and more comfortable when the hairs have a length of 3-4 mm. If the hairs are longer, we recommend that you shave first and epilate the shorter regrowing hairs after 1 or 2 weeks. 10 English Epilating the legs with the epilator -- If you already have some experience with epilation, you can simply use the epilating head with the basic epilation cap. -- If your hairs lie flat on your skin, we advise you to use the active hairlift and massage cap. This cap not only lifts up the hairs but its active massaging roller also minimises the pulling sensation of epilation. Note: Remove the basic epilation cap (1) before you attach another cap (2). , , The appliance starts to operate at speed II, which is the most efficient speed for epilating. Note: If you want to use speed I, press the on/off button a second time. The appliance works best when you move it over your skin without excessive pressure. If the overheat protection is activated, the appliance switches off automatically and the charging light and the speed lights flash red for 30 seconds. You can deactivate the overheat protection by letting the appliance cool down and then switch it on again. Note: If the charging light flashes red again, the appliance has not yet cooled down completely. Overload protection If you press the epilating head onto your skin too hard or when the epilating discs of the epilating head get blocked (e. By clothes), the appliance switches off automatically and the speed lights flash red for 5 seconds. 1 Turn the epilating discs with your thumb until you can remove whatever blocks the epilating discs. Cleaning and maintenance Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. If necessary, clean the adapter with the cleaning brush or a dry cloth. Cleaning the epilator and attachments Clean the epilating head after each wet use to ensure optimum performance. 3 Press the release button (1) and remove the epilating head from the appliance (2). [. . . ] English Travel lock The epilator has an integrated travel lock which prevents the appliance from accidentally being switched on during travel. 1 To activate the travel lock, press and hold the on/off button for 3 seconds until the speed lights flash white 2 times. , , The epilator starts running and stops immediately when the travel lock activates. 17 2 To deactivate the travel lock, press and hold the on/off button for 3 seconds until the speed lights flash white 2 times. [. . . ]