User manual CARRIER 50KDIOM

[. . . ] • When turning off the monitor by detaching the power cord, wait for 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center. • Do not subject the monitor to severe vibration or high impact conditions during operation. [. . . ] Note: The number of displays that can be used in a daisy-chain configuration will depend on the resolution of the input signal being used. • Connect the VGA OUT connector of the monitor to the VGA IN connector of additional 50KDIOM monitor. • Connect the RS232C OUT connector of the monitor to the RS232C IN connector of additional 50KDIOM monitor. • Connect the VIDEO OUT connector of the monitor to the VIDEO IN connector of additional 50KDIOM monitor. • Connect the AC OUT connector of the monitor to the AC IN connector of additional 50KDIOM monitor. Additional 50KDIOM RETURN TO THE CONTENTS User Manual 50KDIOM 4. OSD MENU An overall view of the On-Screen Display (OSD) structure is shown below. NAVIGATING THE OSD MENU NAVIGATING THE OSD MENU USING THE REMOTE CONTROL 1. Press the MENU button on the remote control to display the OSD menu. 2. In the submenu, press the UP/DOWN button to toggle between items, or press PLUS/MINUS button to adjust settings. Press the EXIT button on the remote control to return to the previous menu, or press the MENU button to exit the OSD menu. RETURN TO THE CONTENTS User Manual 50KDIOM 4. 1. 2. In the submenu, press the / button to toggle between items, or press / button to adjust settings. If there is a submenu, press the ENTER/VIDEO SOURCE button to enter it. 16:9 pictures sometimes have a black band at the top and bottom of the screen (letterbox format). The following zoom modes are available: • FULL - This mode restores the correct proportions of pictures transmitted in 16:9 using the full screen display. • NORMAL - The picture is reproduced in 4:3 format and a black band is displayed on either side of the picture. • DYNAMIC - Fill the entire screen by stretching 4:3 pictures non-proportionally. • CUSTOM - Choose to apply the custom zoom settings in the CUSTOM ZOOM submenu. RETURN TO THE CONTENTS User Manual 50KDIOM • REAL - This mode displays the image pixel-by-pixel on screen without scaling the original image size. This mode is recommended when displaying pictures that have black bands at the top and bottom (letterbox format). CUSTOM ZOOM Note: This item is only available when the ZOOM MODE setting is set to CUSTOM. You can use this function to further customise the zoom settings to suit the image you want to display. Use the UP/DOWN button to toggle between the following items, and use the PLUS/MINUS button to adjust. • ZOOM - Expands the horizontal and vertical sizes of the image simultaneously. • HZOOM - Expands the horizontal size of the image only. • VZOOM - Expands the vertical size of the image only. • H POSITION - Moves the horizontal position of the image left or right. • V POSITION - Moves the vertical position of the image up or down. [. . . ] Burns or personal injuries may occur if any body parts are brought too close. Placing any object near the top of the display could also result in heat related damages to the object as well as the display itself. Moving the display with its cables attached may damage the cables and thus cause fire or electric shock danger. • Disconnect the power plug from the wall outlet as a safety precaution before carrying out any type of cleaning or maintenance procedure. [. . . ]