User manual CARLSBRO TYTAN

[. . . ] Information about the use of batteries: Caution •• Risk of leakage: Only use the specified type of batteries. Do not mix new and used batteries. Remove batteries from products that are not in use for a longer period of time. •• Risk of injury: Wear gloves when handling leaking batteries. Do not recharge non-rechargeable batteries. This product complies with the radio interference requirements of the European Community. [. . . ] A copy of the EC Declaration of Conformity (DoC) is available in the packaging. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet. ) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of EN 3 English This product is fitted with an approved molded plug. If you replace the fuse, use one with: Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. packaging materials, exhausted batteries and old equipment. “Made for iPad” means that an electronic accessory has been designed to connect specifically to iPad, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPad may affect wireless performance. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Philips is under license. Note •• The type plate is located on the back of the unit. 4 EN 2 Your Wireless Microphone and Bluetooth® Speaker Congratulations on your purchase, and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. philips. com/welcome. time, remove the batteries. 8 EN Sing along through the wireless microphone Note •• The effective operation range between the wireless microphone and Bluetooth® speaker is approximately 10 meters (30 feet). 4 1 Dock your iPad onto the Bluetooth® speaker. »» A prompt pops up on the iPad screen, asking you to install the relevant app. Slide the OFF/ON switch on the wireless microphone to the ON position. »» The Bluetooth® indicator on the Bluetooth® speaker flashes blue. »» The wireless microphone starts to pair with the Bluetooth® speaker automatically. »» After successful pairing and connection, the Bluetooth® indicator turns solid blue. 2 3 Tap YES on the prompt to install the app (The Voice: On Stage) from Apple App Store. After successful installation, run The Voice: On Stage on the iPad. 5 Find and download a tutorial from The Voice: On Stage, then tap SING for how to sing along through the wireless microphone and Bluetooth® speaker. EN 9 English 4 Play Play from a Bluetooth® enabled device Note •• The effective operation range between the Bluetooth® speaker and your Bluetooth® enabled device is approximately 10 meters (30 feet). •• To pair with a Bluetooth® enabled mobile device, make sure that: no iPad is docked; or you have stopped music play and exited The Voice: On Stage on your docked iPad. •• To pair with a new mobile device, you can press to remove the existing Bluetooth® connection. •• To play from a Bluetooth® enabled device, make sure that you are not playing music from your iPad docked on the Bluetooth® speaker. 6 Select a song from The Voice: On Stage and sing along through the wireless microphone. 1 Press on the top of the Bluetooth® speaker. »» The Bluetooth® indicator flashes blue. 7 Use -/+ on the top of the Bluetooth® speaker to adjust volume. Tip •• If automatic pairing fails, press and hold on the speaker for more than 10 seconds to pair the microphone with the speaker manually. •• If the wireless microphone remains disconnected from the Bluetooth® speaker for more than 15 minutes, it switches to standby mode automatically. [. . . ] •• If the wireless microphone remains disconnected from the Bluetooth® speaker for more than 15 minutes, it switches to standby mode automatically. To switch it on again, you need to slide the OFF/ON switch on the microphone to theOFF position and then slide back to the ON position. •• You can use controls available on the app to adjust sound effects. •• If you experience howling or echo, try to increase the distance between the microphone and speaker or adjust the angle of the microphone towards the speaker. 2 Enable Bluetooth® on your device that supports A2DP (Advanced Audio Distribution Profile). 10 EN 3 Select 'CARLSBRO_TYTAN/10' on your Bluetooth® enabled device and if necessary input '0000' as the paring password. [. . . ]