User manual CARLSBRO SPEAKEASY

[. . . ] SETTING UP YOUR SPEAKEASY SYSTEM The subwoofer and satellite speakers can be located on a desk or shelf, or the subwoofer can be placed on the floor (even under a desk or keyboard). The satellite speakers can be wall mounted using the 'keyhole' mounting plate on the rear of the cabinet. INTRODUCTION Thank you for buying The Carlsbro Black Box System. Correctly used it will provide years of reliable service and fulfill all your performance needs. [. . . ] Correctly used it will provide years of reliable service and fulfill all your performance needs. Please read this user guide thoroughly in order to safeguard your equipment and to obtain maximum performance from it. The Black Box has been designed and voiced to be an versatile and compact sound reinforcement system. The design is deliberately simple for easy and intuitive operation, but will still produce a clear undistorted output for different musical styles. It is ideal for a wide variety of sound reinforcement applications including keyboards and electric organs, home recording, PC's and gaming, and home theatre. If it appears damaged in any way, return it to the retailer it was purchased from in its original packaging. Carlsbro Electronics Ltd cannot accept any responsibility for damage arising from the use of non-approved packaging SYSTEM CONTENTS > > > > > > > Black Box Subwoofer 2 x Satellite Speakers 2 x Speaker wires Audio Signal Cable Mains Power Cable Manual Guarantee Card Note ; ensure the mounting point is secure, and of adequate strength to support the speaker. The satellite speakers can be positioned as desired, but stereo image will be improved if they are a few feet apart, and on the same level. Right Jack (1/4") Input: When this connection is used the unit changes from mono operation to stereo when used in conjunction with the left jack input (3) 14. NOTE: The unit is not isolated from the mains supply until the power cord is removed. Fuse Holder: Should the mains fuse need replacing, remove the AC power lead from the supply, unscrew the fuse holder and remove the fuse. Always replace the fuse with the same type and rating printed on the rear panel of your amp. If the replacement fuse blows immediately then contact your local service agent. NOTE: ALWAYS DISCONNECT THE UNIT FROM THE MAINS SUPPLY BEFORE CHANGING THE FUSE. 15 6 7 8 9 6. MIC2: This is an unbalanced high impedance ¼" jack input suitable for microphones. Use a good quality shielded signal cable to connect a microphone to this input. [. . . ] NOTE: ALWAYS DISCONNECT THE UNIT FROM THE MAINS SUPPLY BEFORE CHANGING THE FUSE. 15 6 7 8 9 6. MIC2: This is an unbalanced high impedance ¼" jack input suitable for microphones. Use a good quality shielded signal cable to connect a microphone to this input. [. . . ]