User manual CARLSBRO POWERLINE 3000

[. . . ] This is where you will find the description of the controls and the internal parts. 3. How to load your dishes (p. 3) This page includes useful tips to help you load your dishwasher correctly and make the most of all the available space. 4. 4) After loading the dishes, you need to select the right wash cycle and measure out the correct dose of detergent and rinse aid. Safety for you and your family (p. 9) Read this chapter carefully, as it will provide you with useful information on installation, use and maintenance safety. [. . . ] The wash cycle stops and then restarts when the electricity comes back on or when you shut the door. Everything is under control! If you have set a 12 hour delay, for example, once you have selected the wash cycle, the 12 hour indicator light will flash followed by the others in sequence until the set time delay is up. A quick look at the indicator lights will keep you informed of the countdown progress at all times. 1) flashing to indicate a delayed start: to remind you that you have set a delayed start; 2) on and not flashing beneath the cycle phase symbol: meaning the cycle has started and is in the phase indicated by the symbol. You can cancel the wash cycle in progress, if it has only just started. When you open the dishwasher door after the wash cycle has just ended or is under way, take care not to scald yourself with the hot steam! 4 ARISTON DISHWASHER - Instructions for installation and use Detergent and rinse aid Only use specific dishwasher detergents. Before the wash cycle starts! The detergent Loading the detergent To open lid A, press button B. If you prefer to use the detergent in tablet form, then place one inside the container “D” and close the lid. D ISHWASHER Useful tips • Use the right amount of detergent: if you use too much, you will not get cleaner dishes, but just more environmental pollution. • Keep your dishwasher detergent and rinse aid in a cool, dry place and away from children. B D C It won’t close!Check whether there is any detergent residue on the edges of the dispenser. The rinse aid container is situated on the inside of the appliance door; you should refill it when you see the container is empty by means of indicator light “D”. In models fitted with the “low rinse aid” indicator light, fill it up when the latter comes on or flashes. If you pour too much rinse aid into container and it overflows, clean off all excess using a sponge. A Proper dosage of the rinse aid improves drying. If drops of water remain on the dishes or spotting occurs, turn the dosage adjuster to a higher setting. If it takes quite some time to fill up your dishwasher, use the soaking cycle to avoid the formation of bad odours and caked-on food. Select the most suitable wash cycle for the type of load you have placed in the dishwasher. The choice of wash cycle depends on the type of dishes to wash and on how dirty they are. To select the right wash cycle, please consult the wash cycle table on page 6. Apart from making you save time and energy, your dishwasher disinfects your dishes, washing them at a high temperature. D ISHWASHER Choose where you want to install your dishwasher, you can even place it so that its sides or back panel are side by side with furniture or up against the wall. The dishwasher is provided with water supply and drain hoses, which can be directed towards the left or right to facilitate appropriate installation. This dishwasher model can be built under a single worktop (please read the relevant instruction sheet). Levelling. Once the appliance is positioned, adjust the feet by screwing them in or out depending on how high you want it and level it so that it is horizontal. This electric household appliance should be connected to the water mains using the cold water supply hose provided with the appliance only. Connect the cold water supply hose to a 3/4 gas threaded connection taking care to screw it tightly onto the tap. If the water hoses are new or have been out of use for an extended period of time, let the water run to make sure it is clear and free of impurities before making the con- Your dishwasher has arrived After having bought or moved your dishwasher to another home, a correct installation ensures that your dishwasher will operate smoothly and efficiently. nection. If this precaution is not taken, the water inlet could get blocked, causing damage to your dishwasher. [. . . ] If indicator light 2 (wash) flashes • the model mark (Mod…. ) and the serial number (S/N…. ) indicated on the rating plate located on the inner door, to one side. Never call upon the services of unauthorised technicians and always refuse spare parts that are not originals. Safety within your home Your dishwasher was built in accordance with the strictest international safety regulations. Read the instructions and information contained in this manual: they will provide you with useful hints as to installation, use and maintenance safety. If you ances must be made inoperterial carefully (follow the inproperly or if maintenance can’t find the solution, then able: cut the power supply structions on how to divide operations are necessary, discall for assistance. your rubbish up provided by connect the dishwasher from your local Council). [. . . ]