User manual CARLSBRO POWERLINE 2000

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CARLSBRO POWERLINE 2000. We hope that this CARLSBRO POWERLINE 2000 user guide will be useful to you.


CARLSBRO POWERLINE 2000 : Download the complete user guide (2348 Ko)

Manual abstract: user guide CARLSBRO POWERLINE 2000

Detailed instructions for use are in the User's Guide.

[. . . ] This is where you will find the description of the controls and the internal parts. 3. How to load your dishes (p. 3) This page includes useful tips to help you load your dishwasher correctly and make the most of all the available space. 4. How to start your dishwasher (p. 4) After loading the dishes, you need to select the right wash cycle and measure out the correct dose of detergent and rinse aid. Special care and maintenance (p. 10) Once in a while, once a month, spend a little time on the filter assembly and the sprayer arms. [. . . ] Before the wash cycle starts! The detergent Loading the detergent To open lid A, press button B. If you prefer to use the detergent in tablet form, then place one inside the container “D” and close the lid. Detergent and rinse aid B D C D ISHWASHER Useful tips • Use the right amount of detergent: if you use too much, you will not get cleaner dishes, but just more environmental pollution. • Keep your dishwasher detergent and rinse aid in a cool, dry place and away from children. 25 gr. 5 gr. It won’t close!Check whether there is any detergent residue on the edges of the dispenser. The rinse aid container is situated on the inside of the appliance door; you should refill it when you see the container is empty by means of indicator light “D”. In models fitted with the “low rinse aid” indicator light, fill it up when the latter comes on or flashes. If you pour too much rinse aid into container and it overflows, clean off all excess using a sponge. F C D Loading the rinse aid. You can adapt the amount of rinse aid used by the dishwasher: use a screwdriver or a coin to adjust the dosage adjuster F situated underneath the lid C. Proper dosage of the rinse aid improves drying. If drops of water remain on the dishes or spotting occurs, turn the dosage adjuster to a higher setting. If, on the other hand, the dishes have white streaks, then turn the dosage adjuster down to a lower setting. You can choose from six different positions. It is normally set to 4. Warning Special dishwasher tablets are now available on the market, and combine the detergent, salt and rinse aid all in one. Select the most suitable wash cycle for the type of load you have placed in the dishwasher. The choice of wash cycle depends on the type of dishes to wash and on how dirty they are. To select the right wash cycle, please consult the wash cycle table on page 6. Apart from making you save time and energy, your dishwasher disinfects your dishes, washing them at a high temperature. D ISHWASHER Choose where you want to install your dishwasher, you can even place it so that its sides or back panel are side by side with furniture or up against the wall. The dishwasher is provided with water supply and drain hoses, which can be directed towards the left or right to facilitate appropriate installation. This dishwasher model can be built under a single worktop (please read the relevant instruction sheet). Levelling. Once the appliance is positioned, adjust the feet by screwing them in or out depending on how high you want it and level it so that it is horizontal. This electric household appliance should be connected to the water mains using the cold water supply hose provided with the appliance only. Connect the cold water supply hose to a 3/4 gas threaded connection, placing the small filter provided between the two, taking care to screw it tightly onto the tap (see figure 2). Your dishwasher has arrived After having bought or moved your dishwasher to another home, a correct installation ensures that your dishwasher will operate smoothly and efficiently. If the water hoses are new or have been out of use for an extended period of time, let the water run to make sure it is clear and free of Installation and moving A Fig. 2 impurities before making the connection. If this precaution is not taken, the water inlet could get blocked, causing damage to your dishwasher. Hot water connection. Your dishwasher can be supplied with hot water from the mains supply (if you have a central heating system with radiators) at a temperature of no more than 60°C. In this case, the wash cycle time will be about 15 minutes shorter and the wash will be slightly less effective. [. . . ] Then try consultARISTON DISHWASHER - Instructions for installation and use 9 D ISHWASHER Cleaning and special maintenance D Care and maintenance The filter assembly f you want consistent good results from your dishwasher, you need to clean the filter assembly. The food particles are removed from the wash water, allowing it to be recirculated during the cycle, filtered perfectly. For this reason, it is a good idea to remove the larger food particles trapped inside the semi-circular filter A and cup “C”after each wash; to remove the filter assembly, pull the cup handle upwards. The entire filter assembly should be cleaned thoroughly once a month: semi-circular filter A + cup C + cylindrical filter B+ microfilter D. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CARLSBRO POWERLINE 2000




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CARLSBRO POWERLINE 2000 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.