User manual CARLSBRO EQUALIZIER

[. . . ] Humbuckers (dual coil pickups) generally have higher output than singlecoil pickups, and tend to overdrive more easily. Singlecoils usually have a brighter, `clearer' tone but less body to the sound. In addition, a pickup sounds tighter and more crisp closer to the bridge and has a warmer, more rounded sound closer to the neck. [. . . ] TECHNICAL SPECIFICATIONS: Voltage Requirement For 230V the working range is 207V to 253V 50-60Hz For 115V the working range is 104V to 126V 50-60Hz Power Consumption 40VA Power Output 25W RMS Output (8W) Dimensions: Height - 355mm Width - 320mm Depth - 210mm Weight (Approx) - 6. 2Kg Carlsbro Electronics Limited constantly seek ways to enhance our products, and improvements take place continually. Whilst every effort is made to produce up to date literature, Carlsbro Electronics Limited reserve the right to alter specifications without prior notice. SUGGESTED SETTINGS: Classic Rock: INTRODUCTION Metal: Thank you for buying a Kickstart 25. Correctly used it will provide years of reliable service and fulfill all you performance needs. Please read this user guide thoroughly in order to safeguard your equipment and to obtain maximum performance from it. The Kickstart range have been designed and voiced specifically with the beginner guitarist in mind. They have been designed to be intuitive and simple to use to enable anyone to start playing with the minimum of fuss, but have enough quality and features to keep you playing for years to come. They are ideally suited for home practice, producing a versatile range of tones without excess volume. NOTE: ALWAYS DISCONNECT THE UNIT FROM THE MAINS SUPPLY BEFORE CHANGING THE FUSE. STORAGE When you are not using your amplifier, disconnect it from the mains supply and store it away from any source of moisture. 1. Connect your guitar here using a high quality, shielded instrument lead. Clean Gain: Adjusts the gain applied to the signal when in clean mode. Channel Indicator LED: Will illuminate to show when the lead channel is active 5. Lead Gain: Controls the amount of gain added to the lead channel Adding gain causes harmonic distortion of the signal, producing a fuller, crunchier sound for use in rock music. Boost Switch: When pushed in, this adds a gain boost to the lead channel. [. . . ] Lead Gain: Controls the amount of gain added to the lead channel Adding gain causes harmonic distortion of the signal, producing a fuller, crunchier sound for use in rock music. Boost Switch: When pushed in, this adds a gain boost to the lead channel. Bass: This is used to control the level of bass or low frequency sound. [. . . ]