User manual CANTON KOMPAKT-UND STANDLAUTSPRECHER

[. . . ] Welcome to the world of pure music We are delighted that you have chosen a Canton loudspeaker. Our products combine high quality components with many years of development experience and meticulous production methods. [. . . ] Distance loudspeaker ­ wall Use of absorbers/spikes if you position your loudspeaker on a hard surface please ensure that it is isolated by using the self-adhesive absorbers or spikes provided. (Spikes can only be used for freestanding loudspeakers with threaded holes). Please ensure that all electrical components are switched off before connecting your loudspeaker!Most Canton loudspeakers can be operated using two separate connection cables for high/midrange frequency and bass frequency (bi-wiring) or using two separate amplifiers (bi-amping). For both bi-wiring and bi-amping operation the cable links should be removed from the two pairs of binding posts. Be careful to set the volume at the correct level, particularly when dealing with low power amplifiers, to avoid damaging the loudspeakers. Inkörningsfas fram till dess att de maximala klangegenskaperna kommer till sin rätt: 15 - 20 uppspelningstimmar. If you have any further questions please contact your Canton dealer, call our Service Hotline on +49 (0) 6083 / 287 57 or send us an e-mail at info@canton. Om du har fler frågor vänd dig till din Cantonåterförsäljare, kontakta vår Service hotline på tel + 49 (0) 6083 / 287-57 eller skicka ett e-mail till info@canton. Problem Bass too weak loudspeaker hums loudspeakers operate at different levels Possible cause Connection cable wrongly connected Decoupling device missing Balance wrongly set on control unit, output set at different levels Solution Check connection cable and reconnect where necessary install absorber or spikes Re-set balance, briefly press output level selector on both loudspeakers ENG GUARANTEE Above and beyond the legally prescribed warranty period Canton offers a guarantee of 5 years on all its passive loudspeakers. [. . . ] This applies to all loudspeakers purchased from an authorised Canton dealer. In the event of damage please contact your dealer or the Canton Service department direct. [. . . ]