User manual CANON ZR200

[. . . ] PUB. DIM-659 English English Français Español Digital Video Camcorder Instruction Manual Camescope numérique Manuel d'instruction Videocámara digital Manual de Instrucciones Mini Digital Video Cassette Please read also the following instruction manual. · Digital Video Software NTSC Important Usage Instructions Introduction WARNING!TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING!TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. Digital Video Camcorder, ZR300/ZR200 systems This device complies with Part 15 of the FCC Rules. [. . . ] Do not turn off the camcorder, change the position of the TAPE/CARD switch, disconnect the power source, open the memory card cover or remove the memory card while the card access indicator is flashing. When you are using a SD Memory Card, make sure that the protect switch is set to allow recording. · 92 Connection to a computer or PictBridge compliant printer will not work when the memory card contains more than 1800 images. For best performance, we recommend not recording more than 100 images on the memory card when you plan to connect the camcorder to a computer or printer. When you are using a Macintosh computer, you may not be able to download image with ImageBrowser or with OS standard software when the memory card contains more than 1000 images. When the subject is too bright (overexposed), use the optional FS-28U ND filter. When the Focus-Priority mode is set to [ON]: When you press the PHOTO button fully before and focusing frame turn green, it may take up to 2* seconds until focus is adjusted and the still image can be recorded to the memory card. If the subject is not suitable for autofocus, the focusing frame turns yellow and locks the focus. When the Focus-Priority mode is set to [OFF]: No focusing frame appears. The camcorder shuts off when you do not operate it for 5 minutes to save power. To continue recording, turn the POWER switch to OFF and then back to CAMERA. E Recording a Still Image on a Memory Card While Recording Movies on a Tape When you are recording a movie on a tape, you can record the same picture as a still image on the memory card. Select the image quality from normal or fine. CAMERA PLAY (VCR) CARD CAMERA CARD PLAY MENU ( 37) CAMERA SETUP STILL I. REC··OFF Using a Memory Card 1. Select [STILL I. REC], set it to [ FINE] or [ NORMAL] and close the menu. While you are recording a movie, press the PHOTO button. The size of the still image will be 640 x 480. The quality of the still image is slightly lower than a still image recorded in CARD CAMERA mode. The still image cannot be recorded on a memory card when a fader, effect or the multi-image screen is activated. The still image cannot be recorded on a memory card when the widescreen mode is selected. " " appears when you press the PHOTO button when [STILL I. REC] is set to [OFF]. 93 Recording from a Tape in the Camcorder CAMERA PLAY (VCR) CARD CAMERA CARD PLAY 1. Press the PHOTO button halfway when the scene you wish to record appears. · The camcorder pauses playback. · When you press the PHOTO button on the wireless controller, recording starts immediately. 3. Press the PHOTO button fully. · The card access indicator flashes. · You can also record a still image by pressing the PHOTO button fully when the tape is in playback pause mode. Recording from Other Video Devices You can record images from devices connected via the AV terminal (analog line-in function), or via the DV terminal as still images on a memory card. [. . . ] Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon Service Facilities in Canada. This limited warranty covers all defects except where: (a) The loss or damage to the product results from: i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow instructions contained in the instruction manual; ii) the use of accessories, attachments, products, supplies, parts or devices with this Canon product that do not conform to Canon specifications or that cause abnormally frequent service problems; iii) repairs or services performed by any party other than a Canon Service Facility; iv) defective batteries or any exposure to water, sand or dirt; v) shipping (claim must be presented to the shipper); (b) Any serial number on the video equipment is altered or removed. (c) The digital video equipment is used for commercial, professional or industrial purposes. This limited warranty does not cover the cabinet (exterior finish) of the digital video equipment, video cassette tapes, head cleanings, nor does it apply to digital video equipment purchased outside Canada. [. . . ]