User manual CANON POWERSHOT S1IS

[. . . ] ENGLISH DIGITAL CAMERA Camera User Guide Camera User Guide CDI-E104-010 XXXXXXX © 2004 CANON INC. PRINTED IN JAPAN Please read the Read This First section (p. Please also see the Software Starter Guide and the Direct Print User Guide. Disclaimer While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. reserves the right to change the specifications of the hardware and software described herein at any time without prior notice. No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without the prior written permission of Canon Inc. [. . . ] button. The white balance cannot be set when (Sepia) or (B/W) mode is selected. 6. Shooting-Advanced Functions 83 Auto Exposure Bracketing (AEB Mode) Mode Dial 2 Select In this mode, the camera automatically changes the exposure within a set range to take three shots after you press the shutter button once. You can adjust AEB settings in 1/3 stops within the range of -2EV to +2EV of the standard exposure setting. The images are recorded in the following order: Standard exposure, underexposure and overexposure. * (BKT-Off) using the or arrow. * The current setting is displayed. 3 Select (AEB), press the SET button and adjust the compensation range using the or arrow. Use to expand the range and to contract it. You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily. 2, 3 3 1, 4 , 1 Press the FUNC. If the flash fires, only one image gets recorded. Focus Bracketing (Focus-BKT Mode) Mode Dial 2 Select You can shoot three images while the focus changes automatically when shooting with the manual focus. Three ranges -small, medium or large- can be selected. Images are shot with the focus position changing in the following order; current position, backwards and forward. * (BKT-Off) using the or arrow, select (Focus-BKT) using the or arrow and press the SET button. * The current setting is displayed. 3 Select a range using the or arrow. Use to expand the range and to contract it. You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily. 2, 3 1, 4 , 1 Press the FUNC. 95). The Focus-BKT mode is not available when shooting with the flash on. The camera will revert to shooting only one image when the flash is on. 6. Shooting-Advanced Functions 85 Locking the Exposure Setting (AE Lock) Mode Dial 2 While pressing the shutter button halfway, press the button. The exposure setting AE lock locks (AE Lock) and the icon appears on the LCD monitor (or viewfinder). Pressing the button again cancels the AE lock. You can set the exposure and focus separately. This is effective when the contrast is too strong between the subject and background or when a subject is backlit. 1, 2 3 Recompose the image and shoot. 2 1 Focus the AF frame or the spot metering frame on the subject on which you wish to lock the exposure setting and press the shutter button halfway. See Selecting and AF Frame (p. Shooting-Advanced Functions The camera focuses on the subject in the AF frame. In mode, AE lock can be set or canceled even during movie recording (p. The automatically selected combinations of shutter speeds and aperture values can be freely changed without altering the exposure with the following procedures. 2. Focus on the subject on which you wish to lock the exposure and press the shutter button halfway. Locking the Flash Exposure Setting (FE Lock) 3. Press the button. The exposure setting will lock and the icon will appear in the LCD monitor (or viewfinder). 4. Press the or arrow until the desired shutter speed or aperture value is reached. The setting will cancel after the shot is taken. Mode Dial You can obtain the correct exposure regardless of the location of your subject in the composition. 1 2 3 1 Press the button and set the flash to fire (p. [. . . ] 12, 27, 40, 50 FCC Notice (Digital Camera, Model PC1058) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ]