User manual CANON IMAGEPROGRAF 8300S BROCHURE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CANON IMAGEPROGRAF 8300S. We hope that this CANON IMAGEPROGRAF 8300S user guide will be useful to you.


CANON IMAGEPROGRAF 8300S BROCHURE: Download the complete user guide (456 Ko)

Manual abstract: user guide CANON IMAGEPROGRAF 8300SBROCHURE

Detailed instructions for use are in the User's Guide.

[. . . ] Be careful not to get ink on yourself when handling these items. If the orange-colored protective film is not removed completely, problems with printing may occur. Paper Guide b Twist off and discard the orange Protective Cap protective cap located on the bottom of the ink tank. Do not press!Ink Port b Remove the orange protective cap from the Print Head and discard it. Electrical Contacts Important If an unintended language is displayed on the LCD, press the Back button to return to the Language selection screen. Once the message "Install the print head and set the ink tank. " appears, go to f. b Load two sheets of supplied paper Electrical Contacts f Open the Scanning Unit (Printer Cover) b Unlock the Scanning Unit (Printer Cover). (1) Open the Document Cover. (2) Move the Scanner Lock Switch towards the release mark to unlock the Scanning Unit (Printer Cover). [. . . ] Before transporting the machine, always lock the Scanning Unit (Printer Cover) by moving the Scanner Lock Switch towards the lock mark. The Print Head Holder moves to the center. Important · Do not touch the electrical contacts. · Do not touch the ink port. Protective Cap Print Head Nozzles c Insert the ink tank into the right-hand (MP-101) into the Auto Sheet Feeder with the printing side (whiter side) facing up, align the paper with the right side of the Cover Guide, then slide the Paper Guide against the paper stack. Paper Guide Print Side Note Do not touch the print head nozzles and the electrical contacts. slot and press the mark on the ink tank until it clicks into place. c Firmly raise the Print Head Lock Lever until it stops. The Print Head Lock Lever may feel heavy. Cover Guide c Make sure that Yes is selected in the d Make sure the ink lamp lights red. Refer to the color guide on the Print Head Lock Lever. Do not touch! message requesting head alignment, then press the OK button. Easy-Scroll Wheel d Insert the Print Head. Turn the Easy-Scroll Wheel left or right to easily select a menu or a setting item. For details, refer to "Basic Operation for the Operation Panel" in the Quick Start Guide. Scanning Unit (Printer Cover) c Plug the power cord in the back of the machine and connect the other end to the wall outlet. Important For your safety, always firmly grip the areas illustrated when opening the Scanning Unit (Printer Cover). If the Document Cover is opened, you cannot open the Scanner Unit (Printer Cover). Be sure to open the Scanner Unit (Printer Cover) and the Document Cover at the same time. * You can also use the {, }, [, or ] button to select. e Push the Print Head to hold it in place, and lower the Print Head Lock Lever. e Close the Inner Cover and the Scanning Unit (Printer Cover). Note Print Head alignment takes about 14 minutes to complete. You will need this to register your product. The pattern is printed. And Print Head is aligned automatically. OK Important Make sure that the Document Cover is closed. Cassette Important If the Scanning Unit (Printer Cover) is left open for more than 10 minutes, the Print Head Holder moves to the right. If the installer in the CD-ROM does not run automatically, click Start and select My Computer, then double-click the CD-ROM icon . b Turn on your Mac. c Insert the Setup CD-ROM. Note If the CD-ROM folder does not open automatically, double-click the CD-ROM on the desktop. * When using Mac OS X v. 10. 2. 8 to v. 10. 3. 3: Restarting the computer while connected to the machine may cause the machine not to be detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the machine off then back on again. d When the main menu appears, click Easy Install. h Follow the on-screen instructions to register your product. Note When the User Registration screen appears, follow on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the machine. e When the Authenticate screen appears, enter your administrator name and password. If you do not know your administrator name or password, click , then follow the on-screen instructions. k After restarting the computer, start Printer Setup Utility i When the Installation completed successfully screen appears, click Exit. (start Print Center if you are using Mac OS X v. 10. 2. 8) and then check that the printer name you want to use is shown in Printer List. For more detailed instructions, refer to the Mac on-screen Help. Now you have completed installation of the software. Note · Select Easy Install in order to install the MP Drivers, on-screen manuals, and application software. [. . . ] For more detailed instructions, refer to the Mac on-screen Help. Now you have completed installation of the software. Note · Select Easy Install in order to install the MP Drivers, on-screen manuals, and application software. Select Custom Install in order to choose the options you would like to install. · To install Adobe® RGB (1998), click Custom Install and follow the on-screen instructions. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CANON IMAGEPROGRAF 8300S




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CANON IMAGEPROGRAF 8300S will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.