User manual CANON 1133A

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CANON 1133A. We hope that this CANON 1133A user guide will be useful to you.


CANON 1133A : Download the complete user guide (12785 Ko)

Manual abstract: user guide CANON 1133A

Detailed instructions for use are in the User's Guide.

[. . . ] UniFLOW Login Device Client Guide Please read this guide before operating this product. After you finish reading this guide, store it in a safe place for future reference. If Adobe Reader/Adobe Acrobat Reader is not installed on your system, please download it from the Adobe Systems Incorporated website. Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions. [. . . ] - For the user ID and password/PIN code/ID card, select the user type as the System Manager when you register the user in the uniFLOW server. - For the department ID and PIN, assign the System Manager ID and System Manager PIN registered in the machine to the user when you register in the uniFLOW server. €¢ When you log in to the machine as an end user in "Authentication to the Machine mode", you cannot access the System Settings and other settings accessible only to the System Manager, and a message such as <System settings is restricted. To access these settings, once log out of the machine and again log in as the System Manager. Managing the Machine with the uniFLOW Integration EN-6 English Resetting the IP Address of the Machine If the message <Cannot connect to the server. > persists on the display after the machine is turned ON, the IP address of the machine may not be properly set. Resume communications between the machine and the uniFLOW server by resetting the IP address of the machine as described below. — If a screen prompting you to enter the System Manager ID and System Manager PIN appears: ❑ ❑ ❑ ❑ ❑ Select <Manager ID> using [ Select <PIN> using [ Press (Log In/Out). nOTE The System Manager ID and System Manager PIN are both set to '7654321' as default. 3 Check the IP address of the machine and set it on <Network Settings>. NOTE Set the IP address of the machine depending on the network environment you are using. Turn OFF the machine and wait at least 10 seconds before turning it back ON. Managing the Machine with the uniFLOW Integration Logging in to the Machine English This section describes the operation procedures for the log-in methods provided by the uniFLOW integration. NOTE When the optional MiCard Reader is attached to the machine, you can log in and log out by holding your ID card over the MiCard Reader, regardless of the applied log-in method (except when the department ID and PIN is applied as the log-in method). €¢ <To Sub Cost Center>: Use to move to Select Cost Center the cost centers in the lower level. €¢ <To Parent Cost Center>: Use to move Canon to the cost centers in the upper level. Group 1 • <Search>: Use to search for cost centers by entering the first several <To Sub Cost Center> characters of the cost center name. ] (Log In/Out) to log Entering a PIN Code Enter your PIN code to log in when the screen shown in step 1 is displayed. NOTE To log in to the machine, you must have a valid PIN code registered. For instructions on how to register a PIN code in the uniFLOW server, see the documentation included with the uniFLOW software. 1 Enter PIN Code Login: Press ID Logout: Press ID PIN Code: PIN Code 12345678 (Apply: Press OK) Enter your PIN code (up to 20 digits) using the numeric keys. The PIN code that you enter will be displayed as asterisks (*******) when the screen returns to the initial log-in screen. [. . . ] ] or [ ] and NOTE The total cost for the job(s) may be displayed depending on the setting. To view the details of the print job status or cancel the print job, select the desired job using [ ] or [ ] and press [OK]. On the <Details> screen, select <Cancel> using [ ] or [ ] and press [OK] to cancel the job. ‘ Select the job you want to print using [ ] or [ ] and press [OK]. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CANON 1133A




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CANON 1133A will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.