User manual CANDY CS4 1061D3/2-S

[. . . ] We are confident it will loyally assist you in safely washing your clothes, even delicates, day after day. Com to gain faster access to supplementary services solely reserved to our most loyal customers. Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance. Only use the washing machine after carefully reading these instructions. [. . . ] L It is not possible to raise the temperature over the maximum allowed for the programme, in order to protect the fabrics. sPIN SPEED button L By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle can be cancelled. L If the label does not indicate specific information, it is possible to use the maximum spin expected in the program. To prevent damage to the fabrics, it is not possible to increase the speed over the maximum allowed for the programme. L To reactivate the spin cycle press the button until you reach the spin speed you would like to set. L It is possible to modify the spin speed without pausing the machine. If the appliance detects the presence of excessive foam, it may exclude the spinning phase or extend the duration of the program and increase water consumption. The machine is fitted with a special electronic device, which prevents the spin cycle should the load be unbalanced. This reduces the noise and vibration in the machine and so prolongs the life of your machine. L Each time the DELAY START button is pressed the indicator lights show how many hours of delay you chosen (3, 6 or 9 hours) and the countdown until the end of it. If the option is not compatible with the selected programme, the relevant indicator light first flashes and then goes off. L When a programme is running, the indicator lights will light in sequence to indicate the current phase: This show the washing temperature of the selected programme that can be changed (where allowed) by the relevant button. This show the spin speed of the selected programme, you can reduce or omit by the relevant button. L When START/PAUSE is pressed on the machine with the door closed, the indicator will flash momentarily and then illuminate. If the door is not properly closed, the light will continue to flash for about 7 seconds, after which the start command will be automatically cancelled. In this case, close the door in the proper way and press the START/PAUSE button. L A special safety device prevents the door from being opened immediately after the end of the cycle. Wait for 2 minutes after the wash cycle has finished and the DOOR LOCKED light has gone out before opening the door. This appliance is equipped with Smart Touch technology that allows you to interact, via the App, with smartphones based on Android operating system and equipped with NFC (Near Field Communication) function. L My Statistics ­ Washing statistics and tips for a more efficient use of your machine. Get all the details of the Smart Touch functions, browsing the App in DEMO mode or go to: www. The Candy simply-Fi App is available for devices running both Android and iOS, both for tablets and for smartphones. [. . . ] this may result in:· The machine attempts to balance the load, increasing the time of The spin cycle aborting to protect the machine and load. If this is experienced remove the load de-tangle it, reload it and restart the spin program. This could be due to the fact that water has not been completely drained: wait a few minutes. Some models include a "no spin" function: make sure it is not selected. [. . . ]