User manual CAME WAVE WA01

[. . . ] To correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. € Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. You are cautioned that any changes or modifications not expressly approved in this manual could void the user’s authority to operate the equipment. Notes on the Grant: To comply with Part 15 of the FCC rules, this product must be used with a Fujifilm-specified ferrite-core A/V cable, USB cable and DC supply cord. [. . . ] To return to protecting or unprotecting all the frames (files), see the procedure on P. 480 KB (for a 30-second voice memo) 1 Set the Power switch to “w”. 2 Press “d” or “c” to select the image (still image) to add a voice memo. 1 10 5 １００−０００９ ＶＯＩＣＥ ＭＥＭＯ ＦＩＮＩＳＨ After 30 seconds of recording, “6” appears on the screen. ϼＫ ＲＥＣ BACK ＲＥ−ＲＥＣ 13 2 00 2 0 1 Press the “MENU/OK” button to display the menu on the screen. — When the image already has a voice memo ◆ ＶＯＩＣＥ ＭＥＭＯ ＶＯＩＣＥ ＭＥＭＯ ＲＥ−ＲＥＣ ＢＡＣＫ If you select an image that already has a voice memo, a screen appears in which you can select whether to re-record the memo. 3 Advanced Features ＯＫ ＳＴＡＲＴ BACK ＣＡＮＣＥＬ Face the microphone on the front of the camera to record your comment. Microphone 4 １００−０００９ ＶＯＩＣＥ ＭＥＭＯ ＲＥＣＯＲＤＩＮＧ Remaining time ２５ｓ Elapsed time progress bar The remaining recording time appears during recording and the self-timer lamp blinks. When the time remaining reaches 5 seconds, the self-timer lamp starts blinking quickly. — To end your comment during recording, press the “MENU/OK” button. 66 67 PLAYBACK MENU t PLAYING BACK VOICE MEMOS 2 0 1 Set the Power switch to “w”. 2 Press “a” or “b” to set a value up to 99 as the number of copies of the frame (file) to be printed. For frames (files) that you do not want printed, set the number of prints to 0 (zero). ϼＲＡＭＥ “u” appears on the screen during playback when the image has specified DPOF settings. Pressing the “DISP/BACK” button while choosing the settings will cancel all the current settings. If there were previous DPOF settings, only the modifications are cancelled. 5 １００−０００９ ＤＰＯＦ ＴＯＴＡＬ／    ９ＳＨＥＥＴＳ Always press the “MENU/OK” button after the settings are completed. — Canceling a frame ◆ To cancel the DPOF setting for a frame (file) you have specified (cancel frame), perform steps 1 to 3 and then: 1Press “d” or “c” to select the frame (file) with the DPOF setting you want to cancel. To cancel the DPOF setting for another frame (file), repeat steps 1 and 2. 1 30 2 0 1 Press “a ” or “b ” to select “WITH DATE” or “WITHOUT DATE”. Selecting “WITH DATE” will cause the date to be imprinted on your prints. — When selecting the “WITH DATE” setting, the date is imprinted on your shots using the Print Service or a DPOFcompatible printer (depending on the printer specifications, the date may not be printed in some cases). [. . . ] When discarding or storing batteries, cover the battery terminals with insulation tape. H Contact with other metallic objects or batteries could cause the batteries to ignite or burst. Because xD-Picture Cards are small, they can be swallowed by children. If a child swallows an xD-Picture Card, seek medical attention or call an emergency number. [. . . ]