User manual CAMBRIDGE TOPAZ CD10

[. . . ] This unit is designed to operate only on the supply voltage and type that is indicated on the rear panel of the unit. This equipment must be switched off when not in use and must not be used unless correctly earthed. To reduce the risk of electric shock, do not remove the unit's cover (or back). If the power cord is fitted with a moulded mains plug the unit must not be used if the plastic fuse carrier is not in place. [. . . ] This unit is not user serviceable, never attempt to repair, disassemble or reconstruct the unit if there seems to be a problem. Servicing is required when the unit has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into it, the unit has been exposed to rain or moisture, does not operate normally or has been dropped. A serious electric shock could result if this precautionary measure is ignored. Important Note This unit has been designed to play compact discs, recordable CDs (CD-R) and re-writable CDs (CD-RW) bearing the identification logo shown here. The CD-R/CD-RW discs should contain properly recorded TOC (Table of Contents) information so that they can be played back. This unit can play only the discs recorded in the CD-DA format designed for music reproduction. Do not attempt to play a disc on this unit containing other data, such as a CD-ROM for PCs. REAR PANEL CONNECTIONS Compact Disc Player Designed in London, England Class 1 Laser Product Luokan 1 Laserplaite Klass 1 Laserapparat LEFT 1 LINE OUTPUT OPTICAL OUT RIGHT 1 Line output Use good quality interconnect cables from these sockets to any line level input on your amplifier. 2 AC power socket Once you have completed all connections to the amplifier, plug the AC power cable into an appropriate mains socket. Your compact disc player is now ready for use. OPTICAL OUT LINE OUTPUT Model: CD5 v3. 0 Power Rating: 230V AC 50Hz Max Power Consumption: 40W CAUTION: RISK OF ELECTRIC SHOCK. NE PAS OUVRIR. Manufactured in an ISO9002 approved facility 3 ACHTUNG: VORM ÖFFNEN DES GERÄTES. NETZSTSCKER ZIEHEN. www. cambridge-audio. com 3 Toslink optical digital output Use to connect to the input of a separate DAC or digital recording machine. Use a high quality TOSLINK fibre optic interconnect cable designed specifically for audio use. Please connect using the Line output. FRONT PANEL CONTROLS Compact Disc Player CD5 POWER OPEN / CLOSE / FOLDER 1 2 3 4 5 6 1 Power Switches the unit between On and Off. 5 Skip/Scan Allows for skipping between tracks and also searching within tracks. Press once to skip a track, press and hold to search within a track. 2 Open/Close Allows you to open and close the disc tray thus making it possible to load a disc. Pressing Play will also close the tray and start the CD. 6 Folder Press to skip forward or backward to locate a desired MP3 folder on the CD. 3 Play/Pause Plays the disc and pauses play. 4 Stop Stops the CD playing. REMOTE CONTROL Insert the supplied AA batteries to activate. Play/Pause Press to play or pause the CD. Stop Press to stop the CD. Skip/Scan Right - press once to skip forward by one track on the CD. Press and hold to scan backwards through tracks. Folder Press to skip forward or backward to locate a desired MP3 folder on the CD. Program, Repeat, Random, Intro Refer to the `Operating instructions' section of this manual for more information. Numerical track select Press the number of the desired track. To select a track number greater than ten, press the first number followed by the second number. OPERATING INSTRUCTIONS Loading and unloading discs 1. Note: - Do not put anything except a Compact Disc into the tray, foreign objects may damage the mechanism. - Do not force the tray by hand during the opening and closing operations. Compact Disc Player CD5 - To avoid dirt and dust entering the mechanism, keep the disc tray closed. POWER OPEN / CLOSE - If the Compact Disc is seriously scratched or too dirty the player may not be able to read it or play it. FOLDER - Never load more than one disc into the disc tray at one time. 3. When the disc tray has opened fully, place a disc carefully in the tray with the label side facing up. When the tray, with a correctly loaded disc, is fully closed the disc will start turning automatically. Pressing Play/Pause will also close the tray and start playing the disc. The disc tray can be opened at any time by pressing the Open/Close button. [. . . ] CAMBRIDGE AUDIO SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY IN THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE. Some countries and US states do not allow the exclusion or limitation of incidental or consequential damages or implied warranties so the above exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other statutory rights, which vary from state to state or country to country. This guide is designed to make installing and using this product as easy as possible. [. . . ]