User manual CAMBRIDGE AUDIO INCOGNITO BK10 INSTALLATION GUIDE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CAMBRIDGE AUDIO INCOGNITO BK10. We hope that this CAMBRIDGE AUDIO INCOGNITO BK10 user guide will be useful to you.
You may also download the following manuals related to this product:
CAMBRIDGE AUDIO INCOGNITO BK10 INSTALLATION GUIDE (1142 ko)
CAMBRIDGE AUDIO INCOGNITO BK10 INSTALLATION GUIDE (1141 ko)
CAMBRIDGE AUDIO INCOGNITO BK10 INSTALLATION GUIDE (1140 ko)
CAMBRIDGE AUDIO INCOGNITO BK10 INSTALLATION GUIDE (1140 ko)
CAMBRIDGE AUDIO INCOGNITO BK10 INSTALLATION GUIDE (1140 ko)
CAMBRIDGE AUDIO INCOGNITO BK10 INSTALLATION GUIDE (1159 ko)
CAMBRIDGE AUDIO INCOGNITO BK10 INSTALLATION GUIDE (1140 ko)
Manual abstract: user guide CAMBRIDGE AUDIO INCOGNITO BK10INSTALLATION GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] For both possibilities, as the BK10 is compatible with the A-BUSTM standard, the unit works with any manufacturers A-BUS compatible products, however source selection from the keypad is only possible with Cambridge Audio's own Incognito A-BUS system or Incognito Ready outputs on Cambridge Audio hi-fi units.
Incognito table-top keypad 5
A-BUS READY / INCOGNITO READY
In this configuration the keypad is connected directly to the amplifier/receiver. A power supply unit (Incognito PS5) is also required to power the one or two keypads. Refer to the diagrams for system connection details:
Speaker cable LR10 BK10 BK10
Speaker cable
Cat5/5e cable PS5
Power
Designed in London, England
CAP5
Impedance 4 - 8 ohms Protection LED indicators:
Fault requiring service (DC)
Multi-Room
IR1 IR3
azur 640A Integrated Amplifier V2. 0
Control Bus
In Out
www. cambridge-audio. com
Max Power Consumption: 700W
Mains Voltage Selector Switch (50 / 60Hz)
Over temperature
International Patent Pending LeisureTech Electronics Pty Ltd
Temporary overload
Power AC
Loudspeaker short Vol Auto Clipping
Manufactured in an ISO9002 approved facility
Impedance 4 - 8 ohms
Loudspeaker Terminals
Important
Please ensure that loudspeaker terminals are fully tightened Veuillez s'assurer que les bornes de l'enceinte sont entièrement serrées
Standby / On
IR10 CD player (eg 640C V2. 0)
Mains Voltage Selector Switch (50 / 60Hz) On
Control Bus Power Off
In Out
IR Emitter
In Left Left
Power AC
Manufactured in an ISO9002 approved facility
6 Incognito table-top keypad
Line Output
Class 1 Laser Product Luokan 1 Laserplaite Klass 1 Laserapparat
Right
Right
Please refer to your User's Manual for more information
Right
A
Left
Right
B
Left
Pre-Out
Tape In
Rec Out 1
Rec Out 2
AV / MD
DVD
Tuner / DAB
CD
Caution Risk of electric shock. Netzstecker ziehen.
Mini-jack lead
azur 640C
Compact Disc Player
Open Close
Play Pause
Stop
Skip Scan
Digital Outputs
Designed in London, England
azur 640C Compact Disc Player V2. 0
Max Power Consumption: 18W Caution
Risk of electric shock Do not open Risque de choc electrique Ne pas ouvrir Vorm offnen des gerates Netzstecker ziehen
Right
Avis Line Output
S/P DIF Co-axial Toslink Optical
Achtung
www. cambridge-audio. com
Aux
CD
Tuner / DAB
DVD
AV / MD
Rec Out 2
Rec Out 1
Tape In
Pre-Out
Left
Left
B
Right
Left
A
Right
On
Off
IR Emitter
In
PSU
In
Keypad 1
Keypad 2
IR2
IR4
Left
Amplifier (eg 640A V2. 0)
Right
Aux
BK10 Table-top keypad
Speaker cable
Cat5/5e cable
The BK10 comes with 10 metres of Cat5 connection cable, but an Incognito CP20 cable pack (with 20 metres of cable, 2 x 3. 5-3. 5 connection cables and a punch-down/wire stripper tool) can be purchased separately. [. . . ] Avoid placing the BK10 near to dimmer switches or other items, which generate a lot of electrical noise.
Safety precautions
The BK10 runs on 24 V DC supplied through the connecting cable. As such there is no mains voltage present in the BK10 and the unit is often safe to place in areas where only extra low voltage (ELV) equipment is permitted. However, it is imperative that you always check the wiring regulations in force for your application and area.
10 Incognito table-top keypad
BK10 Table-top keypad
REAR PANEL CONNECTIONS
1
Speaker output
Connect to a pair of speakers with two runs of standard high-quality speaker cable. Speakers of at least 88 dB SPL for 1W @ 1 metre efficiency should be used with the BK10. Speakers from 48 ohms can be used.
2
Cat5 to BK10
2
1
A Cat-5 cable (terminated with an RJ45 jack plug) is used to connect the BK10 to an AH10 hub or A-BUS Ready receiver.
Incognito table-top keypad 11
KEYPAD CONTROLS
1 - 6 The six LEDs indicate the volume level of the BK10. The LEDs also also display the source selected when the source is changed and can also show the status of some other functions. For full instructions on volume adjustment, source selection, sound adjustment and local source selection modes, refer to the `Operating instructions' section of this guide. By pressing and holding the Standby button for about 2 seconds, all BK10s connected to the AH10 hub will be turned off. If the BK10 is connected to a Cambridge Audio Incognito Ready Amplifier rather than an AH10 hub, the amplifier will be turned off. 9 Source select (right) Use this key to select the current active source.
3 2 1
4
5 6
8
11 7 9
10
12
12 Incognito table-top keypad
BK10 Table-top keypad
10
Volume down Press to decrease the volume or other sound adjustment. Source select (left) Use this key to select the current active source. IR window Point the Incognito LR10 Learning Remote towards this window. A small flashing LED behind this window indicates operation.
11
12
REMOTE CONTROL
The BK10 can be used with the Incognito LR10 remote control, a sophisticated learning remote which is able to learn the codes of all the source equipment remotes. Once programmed the user can thus use the LR10 to perform all operations from one remote. The LR10 is also suitable where the BK10 is to be connected to the A-BUS Ready outputs of AV receivers and amplifiers instead of one of our hubs as it can learn the relevant source change commands etc of the receiver or amplifier as well as the source equipment. Please refer to the Incognito LR10 manual for further information.
Incognito table-top keypad 13
OPERATING INSTRUCTIONS
Volume adjustment
Volume is adjusted using the volume up and volume down buttons on the keypad or remote; this is indicated on the keypad by the intensity of the blue LED lights, there are four levels of intensity per LED.
Source selection
The Source left and right buttons allow you to choose from multiple connected sources. The LED display will indicate which source is selected.
Sound adjustment modes
Pressing the Power/Standby button while holding the Volume down key activates the sound adjustment modes, the four central LEDs on the keypad will then light in sequence to indicate each of the four sound adjustment modes in turn; Bass, Treble, Balance and Fader. These modes can also be activated using the 'Select' button on the remote control. After holding both buttons down for a short period, the second LED on the keypad will light indicating that Bass adjust mode has been activated. In this mode pressing the Volume up/down keys will adjust the Bass (low frequencies) level. Continuing to hold both keys down will light the third LED indicating that Treble adjust mode has been activated. In this mode pressing the Volume up/down keys will adjust the Treble (high frequencies) level.
14 Incognito table-top keypad
BK10 Table-top keypad
Continuing to hold both buttons will light the fourth LED indicating that Balance adjust mode has been activated. [. . . ] This warranty is invalid if (a) the factory-applied serial number has been altered or removed from this product or (b) this product was not purchased from a Cambridge Audio authorised dealer. You may call Cambridge Audio or your local country Cambridge Audio distributor to confirm that you have an unaltered serial number and/or you purchased from a Cambridge Audio authorised dealer. This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or modification of, or to any part of, the product. This warranty does not cover damage due to improper operation, maintenance or installation, or attempted repair by anyone other than Cambridge Audio or a Cambridge Audio dealer, or authorised service agent which is authorised to do Cambridge Audio warranty work. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CAMBRIDGE AUDIO INCOGNITO BK10
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CAMBRIDGE AUDIO INCOGNITO BK10 will begin.