User manual CAMBRIDGE AUDIO DVD99

[. . . ] DVD99 DVD player User's manual 2 ENGLISH Important safety instructions For your own safety please read the following important safety instructions carefully before attempting to connect this unit to the mains power supply. They will also enable you to get the best performance and prolong the life of the unit: 1. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] This sets the audio down-mix mode of the DVD player to 'Stereo'. HDMI cable 1 Out In TV/Monitor with HDMI input HDMI cable AV receiver OR * Class 1 Laser Product Luokan 1 Laserplaite Klass 1 Laserapparat Composite Cb / Pb Component Y Digital Outputs PCM/DTS/ Dolby Digital L / Mixed SL C SBL This product complies with DHHS rules 21 CFR, Chapter 1, Subchapter J, Part 1040 at date of manufacture. 4, 631, 603; 4, 577, 216; 4, 819, 098 and 4, 907, 093 licensed for limited viewing only. "DTS" and "DTS Digital Out" is a trademark of Digital Theatre Systems Inc. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Operation is subject to the following two conditions: 1) This device may not cause harmful interference; 2) This device must accept any interference, including interference that may cause undesired operation. Designed in London, England DVD99 DVD Player Power Rating: 100-240V AC ~ 50/60Hz Max Power Consumption: 40W Cr / Pr CAUTION Risk of electric shock. Netzstecker ziehen. www. cambridge-audio. com HDMI Out S-Video Video Out S/P DIF Co-axial Toslink Optical R / Mixed SR SW SBR 7. 1 Channel Audio Out SCART (Composite/RGB/Stereo Audio) 2 TV/Monitor with HDMI input In 1 2 Connection to a TV via an AV Receiver Direct connection to a TV 9 DVD player setup Press the Setup button on the remote to enter the Setup menus, Two menu options will be displayed, common and professional: General setup page - - General Setup Page - TV Display Screen Saver Scart SACD Priority Component Mode DVD-Audio Mode Subtitle Font Auto Play Mode 16:9 Wide On YCbCr Multi-Channel P-Scan DVD-Audio Font 1 On Setup Go To General Setup Page With the General setup page selected, use the and buttons to move up/down to the desired sub-menu. Use the navigation buttons ( ) to adjust the settings and press the ENTER button to confirm your selection. See the following list for the General setup page structure: Menus Select the common setup to setup basic functions, or professional setup for more advanced settings. TV Display Settings 4:3 PanScan 4:3 LettBox 16:9 Wide 16:9 Wide/Auto On Off YCbCr RGB Multi-Channel 2-Channel CD Mode P-Scan Interlace DVD-Audio DVD-Video Font 1 Font 2 Font 3 On Off Professional Setup Menu Running along the top of the screen are five icons that represent the five main menu pages: General setup Speaker setup Audio setup SACD Priority Video setup Preference Setup* Component Mode Scart Screen Saver * Note: To enter the Preferences menu the unit must first be in Stop mode with the disc drawer out. Press Setup to enter the menu system. Use the navigation arrows ( ) on the remote to highlight the icon at the top of the screen for the main menu you want to select and then either press ENTER or to go into that menu and select its first sub-menu. You can now navigate to each sub-menu item you might want to change using and then to select settings. The yellow highlight always shows the menu or setting you have navigated to, the orange/brown highlight shows the current setting that is being used. To navigate back out of a sub-menu press to move to the sub menu list if necessary and again to move to the top main menu list. Note: Some setup is inter-related with other setup items, and if enabling a function automatically disables another, the disabled function will appear grey and cannot be set. All setup is saved on exiting the menus and is saved even if the unit is powered off. DVD-Audio Mode Subtitle Font Auto Play Mode DivX(R) VOD 10 DVD99 TV Display Use to select the screen format to fit your TV screen. 4:3 PanScan - You can select this screen when connected to a normal TV set. The widescreen picture will display on the full screen, but some parts of the video picture will be cut off automatically. Component Mode Use to select between the following display modes for the Component Video output: Progressive (P-Scan) - Is a method for displaying, storing or transmitting moving images in which all the lines of each frame are drawn in sequence. Interlaced - In contrast to progressive, interlacing is used in traditional television systems where only the odd lines, then the even lines of each frame are drawn alternatively. 4:3 LettBox - Alternatively you can select this screen when connected to a normal TV set. The full widescreen picture is displayed on the screen with black strips on the top and bottom of the screen. DVD-Audio Mode Use to select which portion of a hybrid DVD-Audio disc to playback: DVD-Audio ­ Plays the DVD-Audio portion of the disc with surround audio. DVD-Video ­ Plays the DVD-Video portion of the disc with Dolby Digital. or DTS audio. 16:9 Wide - Select this screen when connected to a widescreen TV set. The full picture will now normally be displayed with no picture cropping (unless the movie itself has black bars recorded into the video). Subtitle Font 16:9 Wide/Auto - 16:9 (widescreen) as well as 4:3 sources will be displayed in their native aspect ratio. [. . . ] "DVD-Audio" is a high resolution PCM-based format and is not to be confused with the Dolby Digital or DTS audio found on normal DVDs. B. 00:00 00:00 001/369 \ Du000 Du001 Du002 Du003 A/V \Du000\ . . MP000 MP001 MP002 A/V A/V Press UP/DOWN arrows to select the desired directory. For example, you select the directory DU000 in Figure A and press SELECT as shown in Figure B. The window returns back to the Press UP/DOWN arrows to select the desired directory. For example, you select the directory DU000 in Figure A and press SELECT as shown in Figure B. [. . . ]