User manual CAMBRIDGE AUDIO AZUR 640T

[. . . ] This unit is designed to operate only on the supply voltage and type that is indicated on the rear panel of the unit. This equipment must be switched off when not in use and must not be used unless correctly earthed. To reduce the risk of electric shock, do not remove the unit's cover (or back). If the power cord is fitted with a moulded mains plug the unit must not be used if the plastic fuse carrier is not in place. [. . . ] Do not plug your 640T directly into a power amplifier unless it has a variable output level. Do not route the power cable so that it can be walked upon or damaged by other items near it. Do not situate it on a rug or other soft surface and do not obstruct any air inlets or outlet grilles. Any space open at the back (such as a dedicated equipment rack) is fine however. Do not install near any heat sources auch as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. When using for the first time it is advisable that it is left on, playing music, for at least 36 hours prior to critical listening. For subsequent use, a warm up period of 10-15 minutes is recommended for maximum enjoyment. If you do not intend to use this unit for a long period, switch it to Standby and unplug it from the mains socket. WARNING - To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. This unit must not be exposed to dripping or splashing water or other liquids. No objects filled with liquid, such as vases, shall be placed on the unit. In the event of spillage, switch off immediately, disconnect from the mains supply and contact your dealer for advice. Do not use any cleaning fluids containing alcohol, ammonia or abrasives. If this happens, switch off immediately, disconnect from the mains supply and contact your dealer for advice. Servicing is required when the unit has been damaged in any way, such as a damaged power-supply cord or plug, liquid has been spilled or objects have fallen into the unit, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped. If you have checked the Troubleshooting guide in the manual with no improvement, do not attempt to repair, dissassemble or reconstruct the unit. A serious electric shock could result if this precautionary measure is ignored. Once all connections have been made, plug the AC Power Cable into an appropriate mains socket. This switch is used to select two types of subtle tone settings, either Warm or Lively. Both S/P DIF Co-axial and Toslink Optical connectors are fitted for connection to a digital recorder e. Allows another unit (such as an analogue radio) to be connected through the 640T to your amplifier, saving an input on your amplifier. The 640T has an F-type screw connection aerial for both FM and DAB signals (supplied). [. . . ] The five channel select buttons and the Tape monitor select button are used to change the input source (CD, DVD etc). Ensure the plug is fully inserted into the wall socket and is switched on. There is no sound There is a hum coming from the speaker There is unwanted background noise and interference Move the tuner away from other electrical equipment that is likely to cause interference Cambridge Audio warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below). Cambridge Audio will repair or replace (at Cambridge Audio's option) this product or any defective parts in this product. [. . . ]