User manual CAMBRIDGE AUDIO AZUR 540D

[. . . ] Congratulations on purchasing this Cambridge Audio Azur range DVD player. It is the result of our most extensive ever research and development program in over three decades of producing quality Hi Fi products. We hope that you will appreciate the results and enjoy many years of rewarding ownership. Progressive Scan DVD players scan from top to bottom in one fluid pass, painting 50/60 whole frames per second. [. . . ] Do not use any cleaning fluids containing alcohol, ammonia or abrasives. Risk of electric shock Do not open Risque de choc electrique Ne pas ouvrir Vorm offnen des gerates Netzstecker ziehen Coaxial Optical S-Video Progressive Scan is only available from the Component video output. With the exception of the SCART output, these outputs are picture only. It is only necessary to use one of the picture connections at any one time. Analogue outputs -The 540D is equipped with a conventional stereo RCA (phono) out that outputs stereo audio for connection to a conventional stereo amplifier. Note: A DTS encoded disc will only output the DTS soundtrack through the digital outputs for external decoding. Both outputs perform the same function- simply choose the type that best suits your needs. Once you have completed all connections to the amplifier, plug the AC Power Cable into an appropriate mains socket. This pair with To TV S-Video input V using S-Video cable V (MINIDINMINIDIN) To TV composite video input using phono cable (RCA-RCA) R To TV component video input using component cable (3RCA-3RCA) 3 Or this connection on it's own Risk of electric shock Do not open Risque de choc electrique Ne pas ouvrir Vorm offnen des gerates Netzstecker ziehen Coaxial Optical S-Video If your TV has S-Video inputs, an S-Video interconnect can be used to connect this player. When the S-Video output is used the component video outputs cannot be used. If the TV has a component video input, the component video output of this player can be used. When the component video outputs are in use the S-Video output cannot also be used. If the Audio Out of this player is connected to your TV, the `Mixed Audio Out' sockets should be connected to your TV's Audio In terminals. The RGB outputs from the Scart connector and the component outputs cannot be used simultaeously. To line inputs of an amplifier using phono cable (2RCA-2RCA) 2 Risk of electric shock Do not open Risque de choc electrique Ne pas ouvrir Vorm offnen des gerates Netzstecker ziehen Coaxial Optical S-Video Risk of electric shock Do not open Risque de choc electrique Ne pas ouvrir Vorm offnen des gerates Netzstecker ziehen Coaxial Optical S-Video To the digital inputs of your AV receiver using either optical or digital cables (COAX-COAX or C OPT-OPT) O Risk of electric shock Do not open Risque de choc electrique Ne pas ouvrir Vorm offnen des gerates Netzstecker ziehen Coaxial Optical S-Video These connections are for audio only - retain chosen video connections If you have used a SCART connection for audio, audio will continue to be delivered through this If Play is pressed shortly afterwards, the DVD will resume play in the place where it was stopped. All of these menus are accessed from the blue Cambridge Logo screen that appears when the DVD player is on with no disc in the tray. Front, Centre and Rear Speaker Settings: adjusts the DVD decoder to compensate between large and small speakers and the size of the signal it sends to the subwoofer. If it is present the low frequencies are split off and sent to the subwoofer, if not the complete audio spectrum will be heard through the front channel. Channel Delay: Allows the distance between the listening position and the centre, subwoofer, rear left and rear right speakers to be individually set (in cm). This is to enable the surround sound to be optimised for different listening room sizes and shapes. You will need a suitably equipped television to handle a component signal. Screensaver: If the DVD is left on and inactive, it will switch to a screensaver to minimise energy consumption and screen burn. [. . . ] Each press of the REPEAT button scrolls through the available options displayed on your TV screen. Repeat off It is also possible to repeat a favourite point of a CD/DVD disc by using the A-B function. Pressing the button once "marks" the beginning of the section you wish to repeat, pressing it again "marks" the end. It is often possible to locate the point that you wish to view through the Chapter/Scene Selection on the disc menu that is navigated by the cursor keys. [. . . ]