User manual BUSHNELL TRAIL SENTRY 11-9320C (WALMART ONLY)

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BUSHNELL TRAIL SENTRY 11-9320C (WALMART ONLY). We hope that this BUSHNELL TRAIL SENTRY 11-9320C (WALMART ONLY) user guide will be useful to you.


BUSHNELL TRAIL SENTRY 11-9320C (WALMART ONLY) : Download the complete user guide (2692 Ko)

Manual abstract: user guide BUSHNELL TRAIL SENTRY 11-9320C (WALMART ONLY)

Detailed instructions for use are in the User's Guide.

[. . . ] TRAIL SENTRYTM Digital Trail Camera with Night Vision LIT #: 09-0940/03-07 Model 119320C Instruction Manual 3/21/07 4:50:28 PM 119320C WalMart Trail Sentry man1 1 Congratulations on your purchase of the Bushnell® Digital Trail SentryTM Camera!This weatherproof, rugged trail camera is designed to record still images or movie clips of outdoor wildlife activity. This instruction manual will help you understand, setup, and use your Sentry to achieve the best possible results. Bushnell Digital Trail Sentry Features If you've been looking for a digital game scouting or surveillance camera that has all the essential features but without the unwanted frills, expense, or confusing operational menus of some less effective off-brand "game cams", the Bushnell Trail Sentry will end your search. With one of the most user friendly interfaces in the industry, this trail camera is easy to setup and use. [. . . ] Image--A digital picture recorded on the SD Card when motion is sensed. Image Delay--Time elapsed between photos while events are sensed and recorded. Especially useful for night photos when a visible flash is undesirable. Dependent on temperature, number of images and number of flashes during that time. Setup--Using the display menu and buttons to set the date/time, still photo or movies, and password. Security (2 methods)--One of the most important requirements of any trail camera. Trigger Speed--Time delay between a subject passing in front of PIR sensor and the image capture of that subject. All Bushnell Trail Cameras have a trigger speed of less than one second. 6 119320C WalMart Trail Sentry man6 6 3/21/07 4:50:28 PM Front of Camera PIR StandardFlash LED IR Flash Camera Lens Control Panel Inside Front LCD Display SD Card Slot PIR Detected (or Low Battery) LED Lock Tab Setup, Menu & Power Buttons Button & Display Detail Parts Guide 119320C WalMart Trail Sentry man7 7 3/21/07 4:50:29 PM Setup and Operation Guide 1. Install 4 "D" cell batteries (flat base of all batteries contacting springs), and insert an SD card (not included, use any capacity from 16MB to 1GB. Do not substitute MMC cards. ) in the slot to the right of the 5 buttons as indicated on the slot cover (upside down, with the notched corner of the card on the left and metal contacts of the card facing the back of the slot). If the Sentry is turned on without a card in place, it may not turn off-reset it by pulling one of the batteries out partway, insert a new or empty SD card, and put the battery back in place. The display will show four "dashes", then change to "HHHH" with a blinking key icon below it (Fig a). This is a prompt to enter your password, which can be changed in the setup menu. The first time the camera is turned on, the password is the default, "0000". Press the Enter button four times to enter four zeros (b) (if you previously changed the password in the setup menu, use the UP/DOWN buttons to enter your password digits, pressing ENTER after each one. ), then press it again to confirm-the display indicates "PASS" and the camera is ready to operate. If the wrong password is entered, the display will flash "ERRO" and the camera will not work or allow the password to be changed. After an incorrect password is entered for the third time, the Sentry will automatically turn off. Power must be turned on again before beginning a new password entry cycle. If you are using the camera for the first time, you should set the date and time so your photos will be "stamped" correctly. Briefly press the Menu button-"DATE" will blink on the display. Press Enter to confirm you want to change the date, then the first two digits will flash, prompting you to enter the month (c). Set the day of the month the same way, and a b c 119320C WalMart Trail Sentry man8 8 3/21/07 4:50:29 PM Setup Guide (cont. ) press Enter again. [. . . ] The camera's field of view is a 45 degree cone, centered on the PIR detection zone. 1 119320C WalMart Trail Sentry man12 12 3/21/07 4:50:30 PM OTHER BUSHNELL DIGITAL TRAIL CAMERA MODELS 119833--Digital Trail Scout 3. 0MP Great images and scouting technology at a great value. This camera will sense deer and other game as far out as 45 feet with its passive infrared sensor. Motion LED lights when activity is detected by the sensor in regular imaging mode and during setup mode for aiming. Comes complete with aircraft aluminum security cable, padlock, and tree bracket. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BUSHNELL TRAIL SENTRY 11-9320C (WALMART ONLY)




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BUSHNELL TRAIL SENTRY 11-9320C (WALMART ONLY) will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.