User manual BUSHNELL ONIX 110

[. . . ] GPS NAVIGATOR Instruction Manual Model 36-1100 Lit# 98-1324/11-08 ONIX 110 About This Manual Thank you for choosing the Bushnell ONIX 110 GPS Receiver. This manual will help you to familiarize yourself with this product and set it up to best suit your needs. Keep this manual for future reference. Copyright Information No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, without the express written permission of Bushnell Outdoor Products. Copyright © 2008 Bushnell Outdoor Products All Rights Reserved. Safety Information · Read and understand all instructions. [. . . ] The white arrow shows the direction of your final destination, while the black arrow show the direction you are traveling. You can pause or stop recording the trail log during the treasure hunting. 54), the trail log recording will stop and a guiding line will be deleted. · If you choose Log Pause, the recorded guiding line will be deleted. Press the Menu button again and select Log Continue to resume recording the trail log. Using Sports Mode The ONIX 110 features a sports mode which allows users to set up a training session and record their performance for post exercise evaluation. Training Setup The Training Setup menu enables you to set up the Fig. 54 32 time, distance, pace, speed, lap when you are taking a walk, jogging, or cycling, and view your exercise performance afterwards. Use the navigation keys to select the field you want to change and press the OK button. Use the navigation keys to adjust each field and press the OK button to confirm. Use the navigation keys to select the field you want to change and press the OK button. Use the navigation keys to adjust each field and press the OK button to confirm. In Sports mode, press the Menu button to display the menu options. Fig. 58 Setting the Pace (cont. ) 2. Select Training Setup and press OK to display the menu options. Use the navigation keys to select the field you want to change and press the OK button. Use the navigation keys to adjust each field and press the OK button to confirm. Use the navigation keys to select the field you want to change and press the OK button. Use the navigation keys to adjust each field and press the OK button to confirm. Setting the Lap This feature allows users to set up the lap counter to count automatically after specified distance or time elapsed during training or manually by pressing the Menu key when a lap has been completed. A message will pop up to inform the user when a lap has been completed. 61) If you set the lap counter to manual, press the Menu button when a lap has been completed and the following screen appears. 60 Setting Auto Pause The auto pause function reminds users to pause recording the sports log after a specified period. [. . . ] The ONIX 110 requires synchronization with at least three satellites to identify with your current location. Once the position has been identified, it requires at least one satellite to maintain status. If available satellite signals are too low in orbit or all in a line, it may not be able to locate your current location 56 Specifications Item Navigation Description ·Waypoints: Max. 1000 waypoints with name (symbol) coordinate and remarks ·Route: 50 reversible and editable routes up to 150 waypoints each ·Trail log: 8 tracking logs with 2500 points each Acquisition Time: ·Cold Start: within 42 seconds ·Warm Start: within 38 seconds ·Hot Start: within 1 second in open sky and 15 seconds indoors ·Update Rate: every second ·Position: within 5 to 25m CEP ·Velocity: 0. 1m/sec. [. . . ]