User manual BUSHNELL IMAGEVIEW 11-8322 & 11-8322G (ENGLISH/SPANISH/FRENCH)

[. . . ] Insert an SD card ("upside down" with metal contacts facing up) in the slot if greater storage is desired. The camera has 16 MB of internal memory which can hold over 100 photos, so a card may not be necessary. However, the internal memory contents will be lost if the batteries are removed or die-unlike photos stored on an SD memory card. A 256MB, 512 MB or 1GB standard speed SD card is available in most consumer electronics or computer stores and a is good choice for your imageView, especially if you will always use "Hi" resolution. [. . . ] Clicking on the new disc icon will show the contents, a folder named "DCiM. " the image folder inside this contains your photos, stored as JPEGs (. They may then be viewed, edited, renamed and saved using any photo or graphics software that accepts . Jpg files, you should install Roxio Photosuite 5 (Windows 98, 2000 or XP only) from the included CD-ROM. After you have copied or opened and saved the photo files to your computers hard drive, you may disconnect the imageview camera (NEVER disconnect the camera while files are still being transferred to your computer. ) Before disconnecting, you should "eject" or stop the "removable disc" representing the camera to avoid an error message (not necessary with Windows XP). See the following pages for full step by step instructions to download your photos. OS: Windows® 98/98SE/2000/ME/XP/Vista (PhotoSuite 5 is not compatible with Vista) CPU: MMX Pentium® 200MHZ equivalent or faster (Pentium® iii 500 MHz for PhotoSuite5TM) Memory: 32MB minimum (64MB recommended for PhotoSuite) SVGA video card w/2MB VRAM, 800x600 screen display, 16 bit High color 200 MB available hard disk space (if installing PhotoSuite) internal USB Port If you are using Windows 98, you must install drivers before connecting the camera to your PC. Windows 2000, ME, and XP do not require drivers, as the camera uses the USB mass storage standard , allowing the photo files to be accessed as if they were stored on an external hard drive. For any Windows OS, if you are not already using photo editing software you prefer, you may install Roxio PhotoSuite® from the CD-ROM. Be sure to read the "Release Notes" completely, noting any tips or potential issues relevant to your PC configuration and OS. Note: With Windows Vista, you may encounter error or warning messages ("file missing", etc) while installing PhotoSuite 5, but clicking "OK" and proceeding should allow the installation to finish. Be sure the driver has been installed first if you are on Windows 98/98SE. Connect the supplied cable to the imageView's USB port, then directly to a main USB port on your computer-do not use front panel/keyboard USB ports or unpowered "hubs". This means that the camera files can be easily viewed, edited, or copied to your hard drive, just as if they were stored on an external hard drive or a CD-ROM. (Note for Mac users: you may need to select "StO" memory access and plug in the imageView while its LCD still displays "StO" for it to appear on the Mac desktop as an "Untitled" disk. (This step is not required with Windows XP, simply use the options in the pop-up window to view, copy or edit your photos). The camera will be seen as a new "Removable Disk" with an unused drive letter assigned to it. Double click this new "Disk" icon, open the "DCiM" folder inside, then the folder(s) inside that ("100MEDiA" , etc). Your photos/videos are the files inside-they have the prefix "DSC" followed by a 4-digit number, as seen earlier on the camera's display when you review photos. Select an existing folder on your hard drive, such as "My Pictures", or create a new folder ("Hawaii Vacation", etc), then click "OK" to transfer copies of the photo files you want. After the photos are transferred to your hard drive, you can disconnect the camera. [. . . ] Connect the equipment into an outlet on a circuit Lenexa, Kansas 66214 Richmond Hill, Ontario L4B 2M9 different from that to which the receiver is connected. Consult the dealer or an experienced radio/tV For products purchased outside the United States or Canada please contact your local dealer for applicable technician for help. Your Bushnell® product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. [. . . ]