User manual BUSHNELL IMAGEVIEW 11-8213 (QVC EXCLUSIVE)

[. . . ] Select: in "Mode Change" press this button to confirm the function. 118213 QVC Imageview-1LIM. indd 4 8/17/06 10:19:03 PM LcD DispLay 1. This mode allows you to take short movie clips, saved as ". avi" files. USB mark appears when USB cord is connected between the camera and the PC. [. . . ] If you have a computer OS as listed above that is USB mass storage compliant, a new disc icon will appear in Windows Explorer (under "My Computer") as a new "Removable Disc" after plugging in the USB cable from the Imageview. Clicking on the new disc icon will show the contents, a folder named "DCIM. " The image folder inside this contains your photos, stored as JPEGs (. jpg file format). They may then be opened, edited, renamed and saved using any photo or graphics software that accepts . jpg files. If you do not have software that will open . jpg files, you should install MGI Photosuite (Windows only) from the included CD-ROM. After you have copied or opened and saved the photo files to your computers hard drive, you may disconnect the Imageview camera (NEVER disconnect the camera while files are still being transferred to your computer. ) Before disconnecting, you should "eject" or stop the removable disc representing the camera to avoid an error message. 10 118213 QVC Imageview-1LIM. indd 10 8/17/06 10:19:06 PM System Requirements (Minimum) OS: Windows® 98/98SE/2000/ME/XP CPU: MMX Pentium® 200MHZ equivalent or faster (Pentium® III 500 MHz for PhotoSuite5TM) Memory: 32MB minimum (64MB recommended for PhotoSuite) SVGA video card w/2MB VRAM, 800x600 screen display, 16 bit High color 200 MB available hard disk space (if installing PhotoSuite) Internal USB Port Software Installation If you are using Windows 98, you must install drivers before connecting the camera to your PC. Insert the CD-ROM into your computer's CD drive; it will auto-run and the install screen will be displayed. Windows 2000, ME, and XP do not require drivers, as the camera uses the USB mass storage standard , allowing the photo files to be accessed as if they were stored on an external hard drive. For any Windows OS, if you are not already using photo editing software you prefer, you may install Roxio PhotoSuite® from the CD-ROM. Be sure to read the "Release Notes" completely, noting any tips or potential issues relevant to your PC configuration and OS. WarninG: Make sure you download any picture from your camera before you remove the batteries from the camera. Transferring The Photos & Videos to Your PC - Step by Step 1. Be sure the driver has been installed first if you are on Windows 98/98SE. Connect the supplied cable to the ImageView's USB port, then directly to a main USB port on your computer-do not use front panel/keyboard USB ports or unpowered "hubs". 11 118213 QVC Imageview-1LIM. indd 11 8/17/06 10:19:06 PM Transferring The Photos & Videos to Your PC continued 3. The LCD display will indicate "STO", and the ImageView will be recognized as a standard "USB Mass Storage" device. This means that the camera files can be easily viewed, edited, or copied to your hard drive, just as if they were stored on an external hard drive or a CD-ROM. (This step is not required with Windows XP, simply use the options in the pop-up window to view, copy or edit your photos). The camera will be seen as a new "Removable Disk" with an unused drive letter assigned to it. Double click this new "Disk" icon, open the "DCIM" folder inside, then the folder(s) inside that ("100MEDIA" , etc). Your photos/videos are the files inside-they have the prefix "IMG__" followed by a number, same as seen earlier on the camera's display when you review photos. Click "Edit>Select All" (or click on one photo, contol+click to select multiple photos), then "Edit>Copy to Folder" (in Windows menus). Select an existing folder on your hard drive, such as "My Pictures", or create a new folder ("Hawaii Vacation", etc), then click "OK" to transfer copies of the photo files you want. After the photos are transferred to your hard drive, you can disconnect the camera. Windows 2000 may produce a screen warning that you have disconnected a USB device without stopping or ejecting the "disk" first (your photo files will not be harmed). If so, check the box that adds an icon to your system tray or taskbar. [. . . ] Send To: IN CANADA Send To: · Reorient or relocate the receiving antenna. Bushnell Outdoor Products Bushnell Performance Optics · Increase the separation between the equipment and receiver. Attn. : Repairs Attn. : Repairs 8500 Marshall Drive 25A East Pearce Street, Unit 1 · Connect the equipment into an outlet on a circuit Lenexa, Kansas 66214 Richmond Hill, Ontario L4B 2M9 different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV For products purchased outside the United States or Canada please contact your local dealer for applicable technician for help. Your Bushnell® product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. [. . . ]